Index >> Support

HW group news

HW products email news

In the shortest period of one month and in text form only. No attachments..
We will give you a notice via email in a case of more significant news in our products.

Name :
Email :

Spam protection. How many is five times six?

Related pages

 

15. 2.2017
HW group on Power Days (Linz)
Find out more about our products on 15. - 17. 03. 2017 in Linz, Austria at Power Days.

BellEquip GmbH
Halle DC, Stand 0427

15. 2.2017
HW group on Smart Automation (Linz)
Find out more about our products on 16. - 18. 05. 2017 in Linz, Austria at Smart Automation.

BellEquip GmbH
Halle DC, Stand 0427

15. 2.2017
HW group on Power Days (Linz)
Find out more about our products on 15. - 17. 03. 2017 in Linz, Austria at Power Days.

BellEquip GmbH
Halle 10, Stand 0910 (A0910)

15. 2.2017
HW group on Power Days (Linz) - Find out more about our products on 15. - 17. 03. 2017 in Linz, Austria at Power Days.

BellEquip GmbH
Halle 10, Stand 0910 (A0910)

15. 2.2017
HW group on Power Days (Linz)
Find out more about our products on 15. - 17. 03. 2017 in Linz, Austria at Power Days.

BellEquip GmbH
Halle 10, Stand 0910 (A0910)

22. 9.2016
AN43: Remote relay and water leak detection with HWg-WLD
HWg-WLD – LAN water flood detector can detect water leaks but does not directly feature relay outputs. This Application Note shows how to signal leaks using remote relay outputs (Damocles 1208).

9. 5.2016
HWg-CS58: Monitoring FM VHF transmitters using Poseidon2
The case study demonstrates remote monitoring of several FM VHF transmitters used by several radio stations around Cheb, Czech Republic. A Poseidon2 4002 unit is used for long-term remote monitoring of broadcasting quality along all signal propagation paths.

10. 9.2015
AN42: 0-20mA or 4-20mA current loop

When using LAN and GSM sensors by HW group, it is important to understand the difference between a 0..20mA current loop and a 4..20mA current loop. This Application Note explains the difference.

4-20mA / 0-20mA analog current loop is the output interface of many industrial sensors (water level measurement, current transformers, gas concentration sensors, and so on). The output current is proportional to the measured value.

19. 6.2015
New product: IP WatchDog2 Lite
The IP WatchDog2 Lite is a new generation of our popular IP WatchDog device.
One simple box with two relay outputs will restart your IP camera, router, WiFi AP or any other LAN device whenever it freezes or fails. No more crazy traveling just to push the reset button.

The IP WatchDog 2nd generation can use our central SMS gateway, connects to our SensDesk.com portal and supports the SNMP protocol.

22. 5.2015
AN44: The SNMP v3 is now supported in all Poseidon2 units
The SNMP v3 is now supported in all Poseidon2 units. This is a major update that brings many advantages and improvements. The following text will explain all the advantages of the SNMP v3 and how to use it in Poseidon2 devices.

30. 4.2015
We are moving to a new address
HW group company is moving to a new address: Formanská 296, Prague 4, 149 00, Czech Republic. Billing address and telephone numbers remain the same.
Due to the move, the online demo of our products will be unavailable for a few days.

16. 3.2015
New SMS Gateway is available now.
The HWg-SMS-GW3 device is a central GSM gateway for sending text messages (SMS) from other HW group products. The third generation is smaller, more cost-effective and is available now.
The SMS-GW3 is 100% backwards compatible with the current SMS-GW2.

12. 3.2015
SensDesk Mobile now available even for Windows mobile platforms
The SensDesk Mobile app for remote overview of your SensDesk.com account is now available even for Windows Mobile devices.

16. 1.2015
Flood detector 1W-UNI 3m

Water detection at a specific point (1D water detection).
Water leak detection using four protruding pins on the sensor body. The attached 3m cable can be directly connected to a RJ11 port of Ares or Poseidon2 monitoring units for water alarm.

3. 11.2014
New temperature sensors with RS-485

Three new Temp-485-Pt100 temperature sensors are available for high-precision measurements. Consider the Frost2 version for measuring low temperatures of –190°C to +150°C (–310°F to +300°F).

29. 10.2014
HW group products can be connected to SolarWinds NPM
We have tested HWg-STE (LAN thermometer) with NMS software SolarWinds NPM (Network Performance Monitor). This software provides Network Monitoring Services including network analysis and deep packet inspection. For setup details, see the TruePath knowledge base.

7. 10.2014
PortStore5: RS-232 to Ethernet with logging
PortStore5 connects a full RS-232 or RS-485 serial port to a LAN. Features a 4 MB internal flash memory for RS-232 data capture.
Stored data can be retrieved when the LAN connection is re-established. Remote serial port can be accessed in Windows as a Virtual Serial Port.
WEB-based configuration and full RS-232 serial port (9 pins).

30. 9.2014
Poseidon2 family manual
Poseidon2 is a product family for use in remote monitoring and for measuring over LAN. Detailed technical manual for whole family is available : Poseidon2 Family - MANUAL.

18. 9.2014
SensDesk.com: New features
Monitor your LAN & GSM sensors from anywhere for free.
Check out new features of the SensDesk.com portal.

21. 8.2014
New accessory: Rack Shelf 1U
The brand new Rack Shelf 1U is a versatile solution for mounting HW group devices to 1U shelves easily.
Rack Shelf 1U makes using HW group products in racks easy. You can even combine different 1U products and sensors.

29. 10.2014
HW group products can be connected to SolarWinds NPM
We have tested HWg-STE (LAN thermometer) with NMS software SolarWinds NPM (Network Performance Monitor). This software provides Network Monitoring Services including network analysis and deep packet inspection. For setup details, see the TruePath knowledge base.

7. 10.2014
PortStore5: RS-232 to Ethernet with logging
PortStore5 connects a full RS-232 or RS-485 serial port to a LAN. Features a 4 MB internal flash memory for RS-232 data capture.
Stored data can be retrieved when the LAN connection is re-established. Remote serial port can be accessed in Windows as a Virtual Serial Port.
WEB-based configuration and full RS-232 serial port (9 pins).

30. 9.2014
Poseidon2 family manual
Poseidon2 is a product family for use in remote monitoring and for measuring over LAN. Detailed technical manual for whole family is available : Poseidon2 Family - MANUAL.

18. 9.2014
SensDesk.com: New features
Monitor your LAN & GSM sensors from anywhere for free.
Check out new features of the SensDesk.com portal.

21. 8.2014
New accessory: Rack Shelf 1U
The brand new Rack Shelf 1U is a versatile solution for mounting HW group devices to 1U shelves easily.
Rack Shelf 1U makes using HW group products in racks easy. You can even combine different 1U products and sensors.

5. 8.2014
New features in Ares: GSM monitoring
The HWg-Ares12 and Ares14 GSM monitoring products have several new features:
Overview of added features:
Pulse counters DI inputs (You can connect S0 energy meters). Periodic emails & connectivity to HWg-PDMS software. HWg-Push protocol implemented, Ares devices can be connected to the SensDesk.com portal. Ares devices are fully configurable via WEB of the SensDesk.com portal now.

22. 5.2014
CS46: Saving energy in a retail chain
Case Study: The customer runs a network of dozens of retail stores. The mother company pays all operating costs, including the energy/utility bills. In the light of increasing energy prices, the customer started to look for ways of reducing the energy costs.

13. 5.2014
Sensor 230V AC 1W-UNI: Measuring 100 to 250V AC voltage
Sensor for measuring and remote monitoring of 110/230V AC supply voltage. Its output is the voltage in [V].

12. 5.2014
HW group at the SENSOR+TEST 2014 trade fair
HW group on SENSOR+TEST 2014 fair in Nuremberg (3.-5.6.2014).
We would like to invite you to our Stand 470 in Hall 12. We will exhibit there with the LUCOM company.

7. 5.2014
op5 System: fully compatible SNMP monitoring
The Op5 System is an enterprise Nagios-based monitoring software. Op5 is built on the Nagios core and engineered by the top contributors to the Nagios open source project. We tested it with Poseidon, HWg-STE thermometer and our other products.

15. 4.2014
New Case Study about IP sensors & IP Cameras integration
HWg-CS41 describes HSYCO HWg Remote control and monitoring + IP cameras in one system. Simple to use solution combines IP sensors from HW group and IP cameras to a single system.
You can control your smart house from anywhere using your iPad, iPhone, Nokia or any other smart phone / tablet device.

27. 3.2014
HWg-STE plus PoE (Power over Ethernet)
HWg-STE plus PoE is an Ethernet thermometer / hygrometer with two digital inputs for dry contacts. It’s powered over Ethernet (IEEE 802.3af) or from included external power adaptor. The package includes a temperature probe and a power adapter. Can be connected to the SensDesk online portal..

11. 3.2014
New product for connecting Pt100 and Pt1000 temperature probes
Converter 2xPt100 1W-UNI lets you measure temperature from two external Pt100 or Pt1000 probes.
Double converter has a 1-Wire UNI (RJ11) output. You can connect it with LAN (Poseidon2) or GSM (Ares) monitoring devices.
Typical applications include measuring extreme temperatures in furnaces, coolers, engines, etc.

13. 2.2014
Poseidon2 4002: Data center environment monitoring
Poseidon2 4002 is a system for remote monitoring of rack environmental conditions (occupies 1U). Measures temperature, checks if the lights are on or the doors are open in the server room, and more. Poseidon is SNMP compatible, includes a data logger, e-mail and SMS alerts. It can be connected to the SensDesk online portal or cloud sensor systems.

31. 1.2014
HW group on Smart Automation 2014 (Vienna)


Find out more about our products on May 6-8 2014 in Vienna, Austria at Smart Automation 2014.

BellEquip GmbH
Halle A, Stand 801 (A0801)

29. 1.2014
Mobile App for HWg-STE plus
Mobile application to monitor several HWg-STE thermometers on your mobile phone.
Added support for HWg-STE plus even with Digital Inputs for Dry Contacts. Application is available for Android and for iPhone devices.

23. 1.2014
IP Relay HWg-ER02b
The new IP relay HWg-ER02b replaces the previous model. Adds Modbus/TCP protocol support, WEB config and two DI (Digital Inputs) for external dry contacts.

17. 1.2014
Product replacement:: PowerEgg2
New PowerEgg2 replaces the previous PowerEgg version. The new model is 100% compatible, just a little bigger.

11. 12.2013
HWg-Config replaces UDP Config
The HWg-Config utility replaces the current UDP Config software utility. New HWg-Config can work with more than one network. It is useful for users of PCs and servers with several network cards or users of many virtual computers.
Program user interface and the functions in HWg-Config remain unchanged.

12. 11.2013
New product: Poseidon2 3468

New Poseidon2 3468 is available. It is a new generation of Poseidon2 products.
LAN device for remote monitoring, web thermostat, industrial-telco version. Supports external RJ11 sensors (voltage, current, illumination, humidity), 4x digital dry contact input and 2x 110/230V relay output. Supports e-mail alerts, SNMP, Modbus/TCP, XML, and the Sensdesk.com online portal.

16. 10.2013
New product: HWg-STE plus
Ethernet thermometer with Digital Inputs.
WEB-based temperature and humidity measurement with two Digital Inputs for dry contacts. Supports SNMP and the SensDesk online portal.
Sends an e-mail when a contact is closed or the temperature is high. Supplied with PDMS – Windows software for producing MS Excel reports.
Supports SNMP. Supplied with one temperature probe, power adapter and software.

8. 10.2013
New sensor: Temp-1Wire 3m IP67
A new temperature sensor with IP67 protection will be introduced in the new HWg-STE plus device.
There will be 1m / 3m and 10m options available.
Because of temperature range (-10°C to +80°C), it is not replacing the current \"Outdoor\" version (-50°C to +125°C).

19. 9.2013
AN40: Certified solution for deep frozen food products
Poseidon 2250, HWg-STE and Captemp SQL 4 cerified for transport, storage and conservation of deep-frozen food temperature monitoring and control. Solution from Captemp, Lda is compatible with REGULATION (EC) No 37/2005, comply with EN 12830, EN 13485 and EN 13486 standards.

6. 9.2013
Smart Automation 2013
Find out more about our products on October 1-3 in Linz, Austria at Smart Automation 2013.

BellEquip GmbH
Halle DC / Stand 425

22. 8.2013
Avoid Tracker Inc or HW group Canada
We strongly discourage our customers from purchasing any HW group units from a company called "HW group North America / HW group Canada (www.hw-group.ca)", "Tracker Inc." or "Lewis Fedyna".
The company is not our distributor since March 2013 due to unresolved financial issues. HW group s.r.o is in no way related to Lewis Fedyna and we are now taking legal action to reclaim payments for our merchandise and to stop the company misusing our brand name.

We do apologize to our customers for the inconvenience.

2. 8.2013
New product: Expander 4xDI 1W-UNI
Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).

17. 7.2013
OpenNMS - HWg-STE supported
Another SNMP 3rd party software tested with our products. There is a new OpenNMS custom plug-in for HWg-STE (IP thermometer). You can find 35 verified and compatible 3rd party applications at our website.

OpenNMS is an enterprise-grade network management application platform developed under the open source model. It is 100% free and open source software that can manage tens of thousands of devices.

27. 6.2013
HWg-SMS-GW: GSM gateway for sending SMS alarms from other products
HWg-SMS-GW is a gateway that enables HW group products to send text message alarms. Send SMS alarms from all HW group products in your LAN. No software needed, works over a LAN at the Box-2-Box (Peer-to-Peer) level. Save administration costs and effort – use only a single SIM for all your devices.

17. 6.2013
Connecting Saia Burgess M-Bus meters to a LAN (SNMP, Modbus/TCP)
This Case study shows how to connect Saia Burgess M-Bus electricity meters to the Ethernet. You can read values remotely using SNMP or Modbus/TCP protocols. Web interface, email reporting and alarming is available. Tested with Saia Burgess ALD1D5FM one phase meter and ALE3D5FM three phase meter. HWg-PWR 25 smart gateway is used to convert M-Bus to LAN.

10. 6.2013
PortBox2: Full RS-232/RS485 serial port to Ethernet
PortBox2 is a RS-232 and RS485 full serial port to Ethernet converter. The remote serial port can be accessed in Windows as a Virtual Serial Port. Web-based configuration, full RS-232 (9 wires), 9th bit support (virtual parity).

20. 5.2013
New product: Shock (vibration) sensor
The “Impaq Shock Sensor” detects vibrations, quivers, shocks and similar phenomena. It connects to the DI input of all our products (Ares, Poseidon, Damocles and others).
The shock sensor provides numerous configuration options to fit the needs of your application.

27. 3.2013
HWg-STE plugin for Freedomotic
Freedomotic is an open source building and home automation software written in Java.
Freedomotic supports popular building automation technologies like BTicino OpenWebNet, KNX, Modbus RTU, X10 and others..

25. 3.2013
CS54: Concrete monitoring (temperature, humidity)
Remote monitoring of concrete drying/hardening or substrate drying. Portable solution, remote monitoring + temperature and humidity logging. When a threshold is reached, a text message is sent and the construction can continue with the next step. Measurements are logged and sent by e-mail over GSM/GPRS, charts can be viewed remotely.

22. 3.2013
NVR IPCorder: supports IP sensors from HW group
NVR IPCorder is a hardware NVR (Network Video Recorder) for IP camera systems. It supports all major IP camera brands and now even the IP sensors and I/Os from HW group.

12. 3.2013
Amper 2013 - Brno
You can find HW group in Brno at the Amper trade fair 19-22 March 2013 / Hall F / Stand F093.

11. 3.2013
Video-manual for HWg-Ares 12 set
Video tutorial on how to get started with the HWg Ares-12 GSM thermometer set.

4. 2.2013
HWg-SDK: new version of API for programmers
HWg-SDK (Software Development Kit) is a package of examples and source code for programmers who want to use IP sensors from HW group in their own applications. Save time and studying of manuals, use ready-made examples. Borland C++, Microsoft Visual C++, Visual Basic, Microsoft Visual Basic 2008, Excel VBA, Microsoft Visual C# 2008, .NET and more..

21. 1.2013
New product: I/O Controller2
Full serial port and I/O to Ethernet. I/O Controller 2 connects a full RS-232(485) serial port and digital I/O to the Ethernet. Configuration is Web-based. The serial port can be used as a terminal server (virtual serial port). Digital inputs and outputs can be controlled over the Web or through Modbus/TCP.

3. 1.2013
HWg training in Budapest
Let me invite you to the HWg products training. Next one will take place 15.1.2013 in Hungary - Hotel GRIFF 1113 Budapest. Click the banner for the registration form.

18. 12.2012
New device: HWg-PWR 3 / 12 / 25
The HWg-PWR is a smart Ethernet gateway for remote energy metering and consumption monitoring. To measure the consumption of water, electricity and other energies, external meters with the M-Bus interface are used. Up to 3 / 12 / 25 M-Bus meters can be connected to the HWg-PWR unit. Individual meters (electricity meter, water meter, gas meter, heat meter etc.) are produced by third parties and connected via their M-Bus interface. HWg-PWR is a smart gateway that monitors energy consumption and warns about abnormal values The unit provides a Web interface, charts, SNMP and Modbus/TCP output, data logging, e-mail and SMS alerts, and much more.

20. 11.2012
Case Study 33: S0 pulse counter with SNMP & Modbus/TCP output
Case study on connecting electricity, gas or water meters to the Ethernet and reading values over the SNMP or Modbus/TCP protocols.
Pulse outputs from 3rd party meters (S0 interface) are connected to the Damocles Ethernet I/O unit. Each Digital Input on the Damocles unit features a 32-bit pulse counter. The value of this counter can be read out over the web using most M2M protocols (SNMP, XML, Modbus/TCP).

25. 10.2012
New product: illumination sensor
Light 1Wire-UNI is our new illumination sensor. Simple light intensity sensor for indoor use. The sensor is designed for use with Ares, Poseidon, and other HW group products. Connects to the 1-Wire UNI bus (RJ11).

22. 10.2012
Case Study: GSM temperature monitoring and logging, e-mail alerts over GPRS
Portable solution for remote temperature monitoring and logging, suitable for monitoring rooms or equipment. Excessive temperature sensed by a probe is signaled by a text message (SMS) or a ring. Ares12 GSM thermometer continuously logs the temperature in its internal memory and periodically e-mails the log over GPRS. The logs can be imported to MS Excel.

1. 10.2012
HWg-Push Nagios collector
Nagios application for collecting data from IP sensors that support the HWg-Push protocol.
Thanks to the application, the Nagios SNMP monitoring system can include sensors in GSM networks or behind firewalls.

24. 9.2012
CS12: SMS & Email temperature alert
Case Study: Temperature is monitored with a GSM/GPRS thermometer. SMS (text message) alert can be delivered to 5 recipients. The Ares12 unit is also capable of sending alerts as standard E-mail through its GPRS data connection. Temperature alert can be sent whenever the temperature is too high or too low.

13. 9.2012
HWg-Juno: News
New presentation for HWg-Juno, including specifications of individual models. Simple way of connecting your Omnicast IP-based camera system by Genetec with external sensors.

11. 9.2012
How to connect HWg-Ares with PDMS
Web presentation on how to connect data from the GSM/GPRS enabled HWg-Ares unit to the PDMS appplication for Windows. The GSM unit can be placed anywhere within the GSM signal coverage area, even in a vehicle. Every hour, your sensor data will appear in your notebook.

16. 7.2012
New application for iPhone & Android devices
There is a new application to monitor several HWg-STE sensors on mobile devices: HWg-STE Monitor. The app is available for iPhone and Android devices.



21. 6.2012
New version of HWg-PDMS monitoring software
An update for the HWg-PDMS monitoring software is available. The new version 2.0.11 supports seamless integration with HWg-Ares GSM/GPRS monitoring via email. Monitor your sensors anywhere in your country.

8. 6.2012
HTemp-1Wire: New OUTDOOR °C and %RH sensor
New Outdoor Temperature + Humidity sensor can be used with HWg-STE, any Poseidon device, and even Ares GSM monitoring.


14. 5.2012
HWg-Juno is now Genetec Omnicast certified device.
All HWg-Juno models are certified by Genetec in Omnicast. Genetec is a leader in IP Video security industry, offering a unified security platform for video surveillance and access control.

26. 4.2012
AN39: HW group IP sensors integration FAQ
In the recent months, many partners are asking about issues with SW integration (HW group sensors to their software). This AN presents a brief summary of important and useful facts.

20. 3.2012
HWg-Ares12: GSM/GPRS Thermometer with datalogger
HWg-Ares12 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers).

9. 3.2012
Amper 2012 - Brno
You can find HW group in Brno at the Amper exhibition -- 20-23 March 2012 / Hall F / Stand 108.

16. 2.2012
HW group on Embedded World 2012
HW group will be co-exhibitors of Egnite company on the Embedded World show in Nuremberg, Germany.
Visit us from Tuesday 28.2. to Thursday 1.3.2012 on the stand 4A-410.



14. 2.2012
Temp-1Wire-Outdoor 3m: -50°C to +125°C
We extended the temperature range for our outdoor 1-Wire temperature sensor. The Temp-1Wire-Outdoor 3m can now be used from -50°C to +125°C (-58°F to 257°F). It can also be connected to the HWg-STE device.

2. 1.2012
New M-Bus meters supported
The HWg-PWR was tested with several new M-Bus meters: electricity meters from EIZ - SCHRACK and DEIF, M-Bus heat meters from EWT - DIEHL Group and GWF, indoor M-Bus temperature and humidity sensor with display from Relay.de.

1. 12.2011
New: 1-Wire hub Power
1-Wire hub Power-boosted hub for the 1-Wire bus. Compatible with 1-Wire and 1-Wire UNI bus. With 1-Wire hub Power, several sensors with higher current consumption (such as Sensor 60V 1W-UNI or Sensor 20mA 1W-UNI) can be connected to a single Poseidon 2250 unit.

31. 10.2011
HW group products on the SPS/IPC/DRIVES 2011
You can find HW group products on the SPS/IPC/DRIVES in Nuremberg. Exhibition is in November 22-24. HW group products on the stand of the LUCOM company (Hall 6, Stand 430).

28. 10.2011
News in PDMS
New video tutorial for easy beginning. HWg-PDMS is a monitoring windows application for data-collection from all HW group IP sensors. The software is free for 3 sensors. NEWS: MS Office 2010 support, Damocles DI counters supported, Email POP3 data collector.

9. 10.2011
Paris: IP Convergence (18-20.10)
You can find HW group products on the IP Convergence exhibition in Paris. October 18-20 in Paris Porte de Versailles. QL3D - stand K29.

3. 10.2011
4 email recipients supported in Poseidon
All Poseidon models can now send alert emails to four recipients. Two emails per line, separated by comma. Available in latest FW for models Poseidon 4002, 2250, 3468, 3268, 3266 a 3265.

26. 9.2011
HW group on the Smart Automation 2011 (Linz)
You can see HW group products on the „Smart Automation 2011“ in Linz (Austria). 04.-06. Oktober 2011 on the stand of Bellequip GmbH, Halle DC / Stand 425.

19. 9.2011
New SPECifications and MANuals for I/O Controllers
New MANuals and SPECifications are available for I/O Controller PL, ER84a and ER88a. New functions overview is in the big I/O Controller manual.

5. 9.2011
New software partner - iMCA Controller
IP sensors from HW group are now supported in the iMCA Controller application from IKS AUTOMATION (Australia).

8. 8.2011
TIP: How to calibrate sensors for Poseidon units.
You can find the Calibrator utility on the Poseidon 2250 page. Every sensor connected to the Poseidon unit can be calibrated with this utility. Valid for all Poseidon models.

1. 4.2011
HW group - Web Facelift
HW group web page design updated.

29. 3.2011
Power strip DC
DC Power Strip splits 12VDC power from a power adapter to connect other devices (e.g. a flood or smoke detector). Useful for Poseidon 2250, 32xx and Damocles MINI.

3. 3.2011
Spider
HW group presents Spider: an active converter between RS-485 and 1-Wire bus. Spider connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon 2250 and RS-485 (RJ45) bus.

28. 2.2011
HWg-PWR: Supported M-Bus meters
This list contains M-Bus (EN 13757-2, EN 13757-3) meters tested with HWg-PWR. HWg-PWR is an Ethernet M-Bus gateway that makes values from external M-Bus meters accessible over LAN (WEB - charts, SNMP, E-mail, MS Excel).

15. 2.2011
1-Wire bus now up to 60m
The 1-Wire bus for external sensors on Poseidon and HWg-STE devices can be now up to 60 meters long. Even 1-Wire UNI bus can be used up to 60m. HW group optimized hardware and firmware on all currently produced models.

3. 2.2011
HWg-SH3: IP-based Rack Access Control System with RFID & SNMP
HWg-SH3 is a cabinet IP Access Control System (ACS) with RFID and SNMP interface. User database is configurable over the Web. Can be used as a stand-alone card access system with web management (Offline) or as a central cabinet Access Control System (Online). Remote monitoring over Email and SNMP.

26. 1.2011
Exhibition in Gothenburg (Sweden)
You can find HW group products in Gothenburg (Sweden), Infrastructure, IT Security exhibition. Stand H01:01 - Direktronik.

11. 12.2010
SNMPcap: Sensors & I/O visualization
We would like to present you the visualisation utility to overview up to 3 devices and their sensors - SNMPcap. All communication is done by SNMP. SNMPcap is easy to use software. SNMPcap supports Poseidon, Damocles and HWg-STE products.

31. 11.2010
Vienna-TEC 2010 show
HW group on the Vienna-TEC 2010 show (12 to 15.10.2010) with BellEquip AT - distributor in Austria. Photos: Stand, HWg Relay Box-2-Box demo, HWg-WLD demo.

30. 11.2010
Poseidon 4001: Cabinet Access Control System & Environment Monitor
Our new device: Poseidon 4001, it´s rack Access Control System and SNMP environment monitoring for 19" cabinets. It's solution for datacenter cabinets IP-based ACS integrated with remote rack monitoring.

18. 11.2010
HWg-WLD Relay: Water leak detector
HW group presents new water leak detector: HWg-WLD Relay. The device detects a water leak anywhere along the length of the connected sensing cable (2+2m – 6.5+6.5ft). Water leak or cable disconnection is indicated by activating a relay (NO/NC).

15. 10.2010
HWg-SH2: SwingHandle Access System
Online cabinet Security Door Control (SDC) with Web & SNMP interface. HWg-SH2 can control front & rear doors of one cabinet. Swinghandle lock access system is controller over IP using documented M2M protocols. With the original HW group software, doors can be opened even with text messages (SMS).

30. 8.2010
HWg-WLD and different sensing cables
We can provide you sensing cables of different length.
We have the sensing cables which total length is 4 m (13 ft), 12 m (40 ft) and 52 m (170,5 ft).

17. 8.2010
New 1-Wire UNI Voltage / Current sensors
New sensors for Current & Voltage measurement via Poseidon (2250, 4002, 4001).
- Sensor 0-20mA / 4-20mA
- Sensor 0-30A (for 110/230V AC)
- Sensor 0-15V
- Sensor 0-60V

29. 7.2010
Nagios plug-ins for HWg-STE, Damocles a Poseidon
HW group prepared easy to use plug-ins to connect Poseidon xxxx, Damocles xxxx & HWg-STE to Nagios NMS.
Nagios is popular, free Linux based Network Monitoring System tool, but to use generig SNMP device is not so easy.
New plug-ins should make it more than easy.

27. 7.2010
Press release: Hsyco & HWg-STE: temperature and humidity sensors integration
HSYCO is a central home & building management system, which can be controlled from iPhone, iPad, Android Phones or touch display. Integration with I/O Controller devices from HW group enables new applications in smart house management.

13. 7.2010
HWg-Juno compatible with Omnicast, Genetec’s Video Surveillance Solution
HW group is entering the IP surveillance market with the introduction of HWg-Juno. HWg-Juno is a specialized device for integration of I/O’s into Genetec’s Omnicast. We are thrilled to bring to market HWg-Juno as first dedicated IP I/O device supporting the Genetec Protocol. Now you can simply connect any number of digital inputs & relay outputs to Genetec’s Omnicast system.

22. 6.2010
Press release: HWg-WLD water flood detector
HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alerts to flooding. HWg-WLD can remotely control a relay output over the network.

16. 6.2010
Press release: Damocles 1208 - remote electricity consumption metering
Damocles 1208 is a cost-effective Ethernet-enabled device with digital inputs (12) and relay outputs (8) accessible over a LAN. Typical applications involve counting pulses from electricity meters, water meters, gas meters etc.

14. 6.2010
HWg-WLD: Water leak detector
HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network.

9. 6.2010
Smart home management: HSYCO & HWg I/O Controller integration
HSYCO is central home & building management system, which can be controlled from iPhone or touch display. Integration with I/O Controller devices from HW group enables new applications in smart house management.

4. 6.2010
HWg-CS55: Thermostat and hygrostat with web interface
The Poseidon 3468 showed as an independent thermostat and hygrostat, relay output for 110/230V AC. Remote monitoring and control over SNMP. For IT applications in cabinets or outdoor locations, maintaining the stable temperature and humidity range is critical.

28. 5.2010
New product: Damocles 1208

Damocles 1208 is a device with 12 remote inputs and 8 outputs over Ethernet with Web interface. M2M communication for connection to SNMP and SCADA systems. Pulse counters on digital inputs. E-mail and SNMP trap notifications of input state changes. Box-2-Box mode - outputs can be controlled over the LAN by another device.

26. 5.2010
AN37: Box-2-Box Connection: Poseidon >> Damocles
Box-2-Box mode connects inputs and outputs between two different units without any software. Poseidon communicates with Damocles using SNMP traps and transfers changes at an input to a remote output.

12. 5.2010
HWg-PWR – Ethernet energy meter
HWg-PWR is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water etc. using electricity meters, water meters, gas meters, heat meters and other sensors equipped with the M-BUS interface. The device also supports alarming through e-mail or SNMP traps whenever allowed values are exceeded.

7. 5.2010
Press release: HWg-Juno: A new family of I/O devices for IP CCTV
HWg-Juno is an I/O device for IP CCTV integration. You can simply connect digital inputs & relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with most IP Video software packages.

6. 5.2010
Poseidon 2250: SNMP monitoring & data logger
Poseidon 2250 logs the values from up to 40 probes (RS-485, dry contacts, temperature, voltage, and more). Data are stored in a flash memory. The device enables monitoring over IP (Web, SNMP, Modbus/TCP) and sends alerts to values out of range (e-mail, SNMP trap, SMS over GSM). Industrial probes (4–20mA and Pt100/Pt1000) are supported. The supplied HWg-PDMS application enables native export of data to MS Excel.

5. 5.2010
HW group at the IFSEC 2010 exhibition
The HW group would like to invite you to our stand on the IFSEC exhibition. 10 - 13 May 2010, NEC, Birmingham UK.
You can find us on the stand G162.

27. 4.2010
HWg-CS53: - GSM temperature monitoring and logging, e-mail alerts over GPRS. Portable solution for remote temperature monitoring and logging, suitable for monitoring rooms or equipment. Excessive temperature sensed by a probe is signaled by a SMS or a ring.

12. 4.2010
Press release: IP WatchDog HWg-WR02a: Ping restarter
IP WatchDog WR02a monitors whether a controlled device, or an Internet connection, is “alive”. If the correct reply is not received in time, the controlled device is restarted using a relay, or a back-up connection is activated.

7. 4.2010
IP WatchDog HWg-WR02a: ping restarter
IP WatchDog HWg-WR02a monitors two devices over IP (PING/WEB) or serial line (RS-232), automatically restarts any of them if it stops responding – autonomous ping relay restarter.

25. 3.2010
Poseidon 4002 presentation
Poseidon 4002 features presentation within 3 minutes.

15. 3.2010
Press Release: HWg-STE PoE: SNMP thermometer
HWg-STE PoE is a web-enabled temperature (humidity) sensor with Power over Ethernet capability (PoE IEEE 802.3af) that simplifies installation.The web thermometer can be powered over the Ethernet (PoE), or using the supplied power adaptor.

10. 3.2010
HWg-STE PoE: SNMP thermometer
HWg-STE PoE is IP enabled web thermometer with Email alerts and SNMP. Measure temperature and humidity with two external probes. Powered over Ethernet or from wall plug adaptor. Windows graphs and MS Excel reporting software included. Delivered with one temperature probe, power adaptor and software included.