HW group noticias

Páginas relacionadas

• Relaciones públicas (Comunicados de prensa)
  • HWg blog

English version

Czech version

Spanish version

3. 2. 2011
HWg-SH3: Sistema de acceso a gabinetes mediante lector de proximidad
HWg-SH3 presenta el sistema de acceso a gabinetes mediante lector de proximidad. La base de datos de las tarjetas autorizadas puede gestionarse de forma remota a través de la Web.

7. 12. 2010
SNMPcap: visualización de sensores & entradas/salidas
Nos gustaría presentarle la utilidad de visualización SNMPcap que ve hasta 3 dispositivos y sus sensores. Comunica por SNMP. El uso del software SNMPcap es fácil. SNMPcap soporta los productos de Poseidon, Damocles y HWg-STE.

18. 11. 2010
HWg-WLD Relé: Detector de fuga de agua
HW group presenta nuevo detector de fuga de agua: HWg-WLD Relé. El dispositivo detecta la fuga de agua en cualquier sitio a lo largo del conectado cable de detección (2+2m – 6.5+6.5ft). La fuga de agua o la desconexión del cable están indicadas por la activación del relé (NO/NC).

15. 10. 2010
HWg-SH2: Sistema de acceso a gabinetes para manijas giratorias
Sistema de control de acceso en línea. Control vía Web de dos manijas giratorias. HWg-SH2 es un sistema de control de acceso en red que controla las puertas frontal y trasera de un gabinete. Puede trabajar de forma independiente con un cierre autónomo, o a través de la Web gracias al software HWg-DCD.

30. 8. 2010
HWg-WLD y diferentes cables de detección
Podemos porveerle los cables de detección de diferentes longitudes.
Tenemos los cables de detección cuyas longitudes totales son 4 m (13 ft), 12 m (40 ft) y 52 m (170,5 ft).

17. 8. 2010
Nuevos sensores de 1-Wire UNI Voltaje / Corriente
Nuevos sensores para la medición de corriente & voltaje via Poseidon (2250, 4002, 4001).
- Sensor 0-20mA / 4-20mA
- Sensor 0-30A (para 110/230V AC)
- Sensor 0-15V
- Sensor 0-60V

29. 7. 2010
Nagios plug-ins para HWg-STE, Damocles y Poseidon
HW group preparó plug-ins de fácil manejo para conectar Poseidon xxxx, Damocles xxxx & HWg-STE con Nagios NMS.
Nagios es popular, gratuita herramienta de Sistema de Monitorización de Red basada en Linux, pero para el uso del dispositivo SNMP no es tan fácil.
Nuevos plug-ins lo hacen más fácil.

2. 1.2012
New M-Bus meters supported
The HWg-PWR was tested with several new M-Bus meters: electricity meters from EIZ - SCHRACK and DEIF, M-Bus heat meters from EWT - DIEHL Group and GWF, indoor M-Bus temperature and humidity sensor with display from Relay.de.

1. 12.2011
New: 1-Wire hub Power
1-Wire hub Power-boosted hub for the 1-Wire bus. Compatible with 1-Wire and 1-Wire UNI bus. With 1-Wire hub Power, several sensors with higher current consumption (such as Sensor 60V 1W-UNI or Sensor 20mA 1W-UNI) can be connected to a single Poseidon 2250 unit.

31. 10.2011
HW group products on the SPS/IPC/DRIVES 2011
You can find HW group products on the SPS/IPC/DRIVES in Nuremberg. Exhibition is in November 22-24. HW group products on the stand of the LUCOM company (Hall 6, Stand 430).

28. 10.2011
News in PDMS
New video tutorial for easy beginning. HWg-PDMS is a monitoring windows application for data-collection from all HW group IP sensors. The software is free for 3 sensors. NEWS: MS Office 2010 support, Damocles DI counters supported, Email POP3 data collector.

9. 10.2011
Paris: IP Convergence (18-20.10)
You can find HW group products on the IP Convergence exhibition in Paris. October 18-20 in Paris Porte de Versailles. QL3D - stand K29.

3. 10.2011
4 email recipients supported in Poseidon
All Poseidon models can now send alert emails to four recipients. Two emails per line, separated by comma. Available in latest FW for models Poseidon 4002, 2250, 3468, 3268, 3266 a 3265.

26. 9.2011
HW group on the Smart Automation 2011 (Linz)
You can see HW group products on the „Smart Automation 2011“ in Linz (Austria). 04.-06. Oktober 2011 on the stand of Bellequip GmbH, Halle DC / Stand 425.

19. 9.2011
New SPECifications and MANuals for I/O Controllers
New MANuals and SPECifications are available for I/O Controller PL, ER84a and ER88a. New functions overview is in the big I/O Controller manual.

5. 9.2011
New software partner - iMCA Controller
IP sensors from HW group are now supported in the iMCA Controller application from IKS AUTOMATION (Australia).

8. 8.2011
TIP: How to calibrate sensors for Poseidon units.
You can find the Calibrator utility on the Poseidon 2250 page. Every sensor connected to the Poseidon unit can be calibrated with this utility. Valid for all Poseidon models.

1. 4.2011
HW group - Web Facelift
HW group web page design updated.

29. 3.2011
Power strip DC
DC Power Strip splits 12VDC power from a power adapter to connect other devices (e.g. a flood or smoke detector). Useful for Poseidon 2250, 32xx and Damocles MINI.

3. 3.2011
Spider
HW group presents Spider: an active converter between RS-485 and 1-Wire bus. Spider connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon 2250 and RS-485 (RJ45) bus.

28. 2.2011
HWg-PWR: Supported M-Bus meters
This list contains M-Bus (EN 13757-2, EN 13757-3) meters tested with HWg-PWR. HWg-PWR is an Ethernet M-Bus gateway that makes values from external M-Bus meters accessible over LAN (WEB - charts, SNMP, E-mail, MS Excel).

15. 2.2011
1-Wire bus now up to 60m
The 1-Wire bus for external sensors on Poseidon and HWg-STE devices can be now up to 60 meters long. Even 1-Wire UNI bus can be used up to 60m. HW group optimized hardware and firmware on all currently produced models.

1. 4.2011
HW group - Web Facelift
HW group web page design updated.

29. 3.2011
Power strip DC
DC Power Strip splits 12VDC power from a power adapter to connect other devices (e.g. a flood or smoke detector). Useful for Poseidon 2250, 32xx and Damocles MINI.

3. 3.2011
Spider
HW group presents Spider: an active converter between RS-485 and 1-Wire bus. Spider connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon 2250 and RS-485 (RJ45) bus.

28. 2.2011
HWg-PWR: Supported M-Bus meters
This list contains M-Bus (EN 13757-2, EN 13757-3) meters tested with HWg-PWR. HWg-PWR is an Ethernet M-Bus gateway that makes values from external M-Bus meters accessible over LAN (WEB - charts, SNMP, E-mail, MS Excel).

15. 2.2011
1-Wire bus now up to 60m
The 1-Wire bus for external sensors on Poseidon and HWg-STE devices can be now up to 60 meters long. Even 1-Wire UNI bus can be used up to 60m. HW group optimized hardware and firmware on all currently produced models.

3. 2.2011
HWg-SH3: IP-based Rack Access Control System with RFID & SNMP
HWg-SH3 is a cabinet IP Access Control System (ACS) with RFID and SNMP interface. User database is configurable over the Web. Can be used as a stand-alone card access system with web management (Offline) or as a central cabinet Access Control System (Online). Remote monitoring over Email and SNMP.

26. 1.2011
Exhibition in Gothenburg (Sweden)
You can find HW group products in Gothenburg (Sweden), Infrastructure, IT Security exhibition. Stand H01:01 - Direktronik.

11. 12.2010
SNMPcap: Sensors & I/O visualization
We would like to present you the visualisation utility to overview up to 3 devices and their sensors - SNMPcap. All communication is done by SNMP. SNMPcap is easy to use software. SNMPcap supports Poseidon, Damocles and HWg-STE products.

31. 11.2010
Vienna-TEC 2010 show
HW group on the Vienna-TEC 2010 show (12 to 15.10.2010) with BellEquip AT - distributor in Austria. Photos: Stand, HWg Relay Box-2-Box demo, HWg-WLD demo.

30. 11.2010
Poseidon 4001: Cabinet Access Control System & Environment Monitor
Our new device: Poseidon 4001, it´s rack Access Control System and SNMP environment monitoring for 19" cabinets. It's solution for datacenter cabinets IP-based ACS integrated with remote rack monitoring.

18. 11.2010
HWg-WLD Relay: Water leak detector
HW group presents new water leak detector: HWg-WLD Relay. The device detects a water leak anywhere along the length of the connected sensing cable (2+2m – 6.5+6.5ft). Water leak or cable disconnection is indicated by activating a relay (NO/NC).

15. 10.2010
HWg-SH2: SwingHandle Access System
Online cabinet Security Door Control (SDC) with Web & SNMP interface. HWg-SH2 can control front & rear doors of one cabinet. Swinghandle lock access system is controller over IP using documented M2M protocols. With the original HW group software, doors can be opened even with text messages (SMS).

30. 8.2010
HWg-WLD and different sensing cables
We can provide you sensing cables of different length.
We have the sensing cables which total length is 4 m (13 ft), 12 m (40 ft) and 52 m (170,5 ft).

17. 8.2010
New 1-Wire UNI Voltage / Current sensors
New sensors for Current & Voltage measurement via Poseidon (2250, 4002, 4001).
- Sensor 0-20mA / 4-20mA
- Sensor 0-30A (for 110/230V AC)
- Sensor 0-15V
- Sensor 0-60V

29. 7.2010
Nagios plug-ins for HWg-STE, Damocles a Poseidon
HW group prepared easy to use plug-ins to connect Poseidon xxxx, Damocles xxxx & HWg-STE to Nagios NMS.
Nagios is popular, free Linux based Network Monitoring System tool, but to use generig SNMP device is not so easy.
New plug-ins should make it more than easy.

27. 7.2010
Press release: Hsyco & HWg-STE: temperature and humidity sensors integration
HSYCO is a central home & building management system, which can be controlled from iPhone, iPad, Android Phones or touch display. Integration with I/O Controller devices from HW group enables new applications in smart house management.

13. 7.2010
HWg-Juno compatible with Omnicast, Genetec’s Video Surveillance Solution
HW group is entering the IP surveillance market with the introduction of HWg-Juno. HWg-Juno is a specialized device for integration of I/O’s into Genetec’s Omnicast. We are thrilled to bring to market HWg-Juno as first dedicated IP I/O device supporting the Genetec Protocol. Now you can simply connect any number of digital inputs & relay outputs to Genetec’s Omnicast system.

22. 6.2010
Press release: HWg-WLD water flood detector
HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alerts to flooding. HWg-WLD can remotely control a relay output over the network.

16. 6.2010
Press release: Damocles 1208 - remote electricity consumption metering
Damocles 1208 is a cost-effective Ethernet-enabled device with digital inputs (12) and relay outputs (8) accessible over a LAN. Typical applications involve counting pulses from electricity meters, water meters, gas meters etc.

14. 6.2010
HWg-WLD: Water leak detector
HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network.

9. 6.2010
Smart home management: HSYCO & HWg I/O Controller integration
HSYCO is central home & building management system, which can be controlled from iPhone or touch display. Integration with I/O Controller devices from HW group enables new applications in smart house management.

4. 6.2010
HWg-CS55: Thermostat and hygrostat with web interface
The Poseidon 3468 showed as an independent thermostat and hygrostat, relay output for 110/230V AC. Remote monitoring and control over SNMP. For IT applications in cabinets or outdoor locations, maintaining the stable temperature and humidity range is critical.

28. 5.2010
New product: Damocles 1208

Damocles 1208 is a device with 12 remote inputs and 8 outputs over Ethernet with Web interface. M2M communication for connection to SNMP and SCADA systems. Pulse counters on digital inputs. E-mail and SNMP trap notifications of input state changes. Box-2-Box mode - outputs can be controlled over the LAN by another device.

26. 5.2010
AN37: Box-2-Box Connection: Poseidon >> Damocles
Box-2-Box mode connects inputs and outputs between two different units without any software. Poseidon communicates with Damocles using SNMP traps and transfers changes at an input to a remote output.

12. 5.2010
HWg-PWR – Ethernet energy meter
HWg-PWR is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water etc. using electricity meters, water meters, gas meters, heat meters and other sensors equipped with the M-BUS interface. The device also supports alarming through e-mail or SNMP traps whenever allowed values are exceeded.

7. 5.2010
Press release: HWg-Juno: A new family of I/O devices for IP CCTV
HWg-Juno is an I/O device for IP CCTV integration. You can simply connect digital inputs & relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with most IP Video software packages.

6. 5.2010
Poseidon 2250: SNMP monitoring & data logger
Poseidon 2250 logs the values from up to 40 probes (RS-485, dry contacts, temperature, voltage, and more). Data are stored in a flash memory. The device enables monitoring over IP (Web, SNMP, Modbus/TCP) and sends alerts to values out of range (e-mail, SNMP trap, SMS over GSM). Industrial probes (4–20mA and Pt100/Pt1000) are supported. The supplied HWg-PDMS application enables native export of data to MS Excel.

5. 5.2010
HW group at the IFSEC 2010 exhibition
The HW group would like to invite you to our stand on the IFSEC exhibition. 10 - 13 May 2010, NEC, Birmingham UK.
You can find us on the stand G162.

27. 4.2010
HWg-CS53: - GSM temperature monitoring and logging, e-mail alerts over GPRS. Portable solution for remote temperature monitoring and logging, suitable for monitoring rooms or equipment. Excessive temperature sensed by a probe is signaled by a SMS or a ring.

12. 4.2010
Press release: IP WatchDog HWg-WR02a: Ping restarter
IP WatchDog WR02a monitors whether a controlled device, or an Internet connection, is “alive”. If the correct reply is not received in time, the controlled device is restarted using a relay, or a back-up connection is activated.

7. 4.2010
IP WatchDog HWg-WR02a: ping restarter
IP WatchDog HWg-WR02a monitors two devices over IP (PING/WEB) or serial line (RS-232), automatically restarts any of them if it stops responding – autonomous ping relay restarter.

25. 3.2010
Poseidon 4002 presentation
Poseidon 4002 features presentation within 3 minutes.

15. 3.2010
Press Release: HWg-STE PoE: SNMP thermometer
HWg-STE PoE is a web-enabled temperature (humidity) sensor with Power over Ethernet capability (PoE IEEE 802.3af) that simplifies installation.The web thermometer can be powered over the Ethernet (PoE), or using the supplied power adaptor.

10. 3.2010
HWg-STE PoE: SNMP thermometer
HWg-STE PoE is IP enabled web thermometer with Email alerts and SNMP. Measure temperature and humidity with two external probes. Powered over Ethernet or from wall plug adaptor. Windows graphs and MS Excel reporting software included. Delivered with one temperature probe, power adaptor and software included.

18. 2.2010
Windows7 compatibility -
All HWg software applications are Windows7 compatible now.

11. 1.2010
19” cabinet monitoring over GSM and LAN
HWg-CS32: Independent rack monitoring over IP and GSM. Open door, high temperature or electricity outage is signaled by SMS to several phone numbers. E-mail and SNMP trap are also sent. It is possible to connect a horn (local alarm) or a fan (local cooling). The solution is designed for 19” cabinets.

16. 12.2009
Press Release: Poseidon 4002: Rack mount environment monitoring
The Poseidon 4002 is a 19" 1U rack mount system for datacenter temperature and environment monitoring

11. 11.2009
Case study HWg-CS51: Controlling a 110/230V power switch over Ethernet
The remote power switch is connected to a LAN (IP) and controlled from any application. Open a gate or switch on a light (230V/16A relay output) by clicking an icon on your desktop.

4. 11.2009
Case study HWg-CS13: SMS and SNMP monitoring of temperature / humidity
Temperature and humidity is monitored with a web thermometer that is also capable of sending alerts as text messages (SMS). High temperature alerts are sent by E-mail / SNMP trap as well as by SMS (via a GSM modem).

30. 10.2009
Case study HWg-CS11: E-mail alert to high temperature (overheating)
IP thermometer enables web-based, remote temperature monitoring over IP networks. System overheating or excessive temperature alerts are sent by e-mail.

13. 10.2009
Poseidon 4002: Rack mount environment monitoring
Poseidon 4002 is 19" 1U rack mount system for datacenter temperature and environment monitoring. The Poseidon solution monitors racks and computer rooms. Alerting works by e-mail, SNMP traps, SMS, output relays.

1. 10.2009
HWg-STE presentation
You can download the presentation of HWg-STE. It is an ethernet web temperature sensor with MS Excel reporting software.

24. 9.2009
Press release: HWg PDMS - Monitoring software
HWg PDMS is a Windows application, primarily designed for IT environments, that logs temperature, energy consumption, or access to monitored rooms.

23. 9.2009
HWg-PDMS: Monitoring software
Windows application for logging data from sensors and inputs over a LAN (Poseidon, Damocles, HWg-STE).
The application produces MS Excel reports.
PDMS (Poseidon & Damocles Monitoring System) show you graphs from all your devices.

26. 8.2009
I/O Controller: HWg-ER88a
I/O Controller enables monitoring of binary inputs as well as control of outputs and RS-232/485 serial line remotely over TCP/IP and Ethernet.

12. 8.2009
HWg Case Studies
New section with application examples. Studies available also in PDF version.

23. 7.2009
Press release: HWg STE - Ethernet thermometer (hygrometer)
HWg STE is the Ethernet thermometer (hygrometer) with SNMP and WEB interfaces. HWg STE alerts by e-mail to temperatures outside of a safe range.

14. 7.2009
HWg-STE: IP thermometer
STE is an Ethernet thermometer (hygrometer) with SNMP and WEB interfaces. Alerts by e-mail to temperatures outside of a safe range. Supplied with a power adapter and one temperature sensor, another temperature/humidity sensor can be connected.

10. 7.2009
AN36: IP Thermostat with a Web interface
Poseidon can be used for monitoring over an IP network, or as a thermostat or hygrostat. Application Note 36 describes the available local / remote thermostat function options and the Poseidon unit setup

3. 7.2009
How to wire RS-485 bus with Poseidon
How to wire 10 to 30 sensors to Poseidon 1250/2251 RS-485 bus is common question. Wiring examples and typical solutions are listed in this PDF.

22. 6.2009
IPRC cmd
New software utility for I/O Controllers & IP Relay. Command line outputs control utility for Windows/Linux.

14. 6.2009
NEW: I/O Controller HWg-ER84a
RS-232/485 serial port, 4 relay outputs and 8 inputs for contacts accessible over an Ethernet IP network. HWg-ER84a is a terminal server (serial line) with added binary inputs and relay outputs. It is controlled over TCP/IP using a Telnet-like M2M protocol.

2. 6.2009
HW group products are distributed in Poland. - We would like to present you our new distributor - Atel Electronics.
For 20 years Atel Electronics company has been importing and distributing high quality subassemblies of telecommunication and computer networks. The company owns its strong position on the market thanks to complex offer which is continuously widen with solutions of renowned suppliers.
The company offers passive network subassemblies (racks, wiring, connectors), active network subassemblies (switches, routers, KVM devices, VoIP solutions, SFP modules) and advanced measurement equipment to fiber communication systems. There are almost 4000 products in the offer.

1. 6.2009
New Poseidon 3468 with 110/230V relay outputs

Poseidon is an IP thermostat with 2 relay outputs, 4 dry contact inputs, and support for 4 sensors. Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Two relay outputs rated up to 110/230V can be controlled manually over a web interface.

15. 5.2009
IP Cameras & Poseidon
Connect IP sensors with live IP video to enable new possibilities and applications.

HW group presented the benefits of this integration at a roadshow with IPSECURITY - the largest distributor of Axis IP cameras in the Czech Republic

14. 5.2009
New press release: Poseidon and IP cameras
ATEAS Security System and HW group have interconnected ATEAS, the IP surveillance system, with external sensors using the Poseidon product. It increases operator comfort as well as overall security.The cameras can now automatically point to a spot where a sensor has detected possible intrusion. The resulting solution enables automatic control of the IP video surveillance system using sensors and peripherals connected to Poseidon products.

12. 5.2009
3rd party SW: ATEAS IP camera software
ATEAS Security is a complete solution for IP-based security systems. The system supports IP cameras by AXIS and IQeye as well as Poseidon products by HW group. ATEAS Security can utilize the full potential of AXIS IP cameras to maximize surveillance effectiveness, including the option to connect external systems, coordinate maps, vehicle registration plate recognition module, and so on.

29. 3.2009
Up to 100 virtual serial ports now..
HWg Present HW VSP Multiport with up to 100 virtual serial ports support on one PC. Multiport works only with HWg devices! Older unlimited version with one serial port support only is still available under HW VSP Singleport name.

26. 3.2009
HW group on AMPER 2009
You can meet HWg on the AMPER 2009 exhibition in Prague. Exhibition is from 31.3. to 3.4.2009 on the "HW group & HW server" stand 4B3 - Hall 3.

20. 3.2009
Damocles model 2404i

Damocles 2404i features 24 dry contact inputs and 4 relays controlled over an IP network (Ethernet). Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Outputs can be controlled manually in the web interface, or with M2M protocols (SNMP, XML, Modbus/TCP).

13. 2.2009
New temperature, humidity and pressure sensors with display
HWg introduces new sensors for measuring air pressure, temperature, humidiry and dew point. A display on the sensor itself shows the current value. Three new products -- HTemp-485 T3411, T3419 and PHTemp-485 T7410 -- can be connected to Poseidon 1250 and 2251.

13. 1.2009
PHP Logger for Poseidon & Damocles
PHP application for data recording and displaying graphs from several Poseidon and Damocles units.

2. 12.2008
GSM support in Poseidon 1250
Poseidon model 1250 supports direct connection of a GSM modem to the serial port. Alert can be easily sent as SMS without Internet connection.
Available now in latest firmware 1.9.10. This feature upgrade is for free.

25. 11.2008
New product: HWg-Tg11
GSM thermometer with temperature logging and alerting over SMS and e-mail (GPRS). In addition, Tg11 logs the temperature to its internal Flash memory (every 15 minutes) and e-mails stored data (every 4 hours) over GPRS.

21. 11.2008
3rd party SW: ProfiLab-Expert
ProfiLab enables you to produce an executable (.exe) file from function blocks. It is a Windows application with a user panel providing the defined functionality.
Application design resembles working with function blocks for PLCs; however, programming in ProfiLab is simpler.

8. 10.2008
(Press Release) PortStore4: CDR data easily through IP over FTP / E-mail
PortStore4 is a unit for collecting call accounting data from an analog or IP-based private branch exchange (PBX). Over the network, you can easily find out how long the phones ring at the branch, get a list of calls, or configure the PBX.

2. 10.2008
AlViS: new supported SW
AlViS is a GUI (graphical user interface) based software for surveillance applications, supporting all current Poseidon & Damocles devices.
AlViS is a command center solution for building surveillance monitoring as well as for property management purposes.
AlViS is compatible with over 100 security systems from several manufacturers.

9. 9.2008
PortStore4
PortStore4 is an solution for monitoring a private branch exchange (PBX) and collecting call accounting data. CDR/SMDR data can be sent by encrypted e-mail or via FTP.

PortStore4 supports analog as well as VoIP telephony. It can collect call acounting data (CDR/SMDR) from old analog PBXs via serial port, or from Trixbox or Asterisk PBXs via IP.

2. 9.2008
Replacement of “HTemp-485”
The “HTemp-485 Box2” is a new version of the RS-485 temperature & humidity sensor.
The new “Box2” replaces the previous version, “HTemp-485”. “Box2” is smaller, with easier wall mounting, and can be connected using a terminal block as well as a RJ45 connector (Poseidon 1250 & 2251 wiring standard).

2. 9.2008
Replacement of “Temp-485”
The “Temp-485 Box2” is a new version of the RS-485 temperature sensor.
The new “Box2” replaces the previous version, “Temp-485”. “Box2” is smaller, with easier wall mounting, and can be connected using a terminal block as well as a RJ45 connector (Poseidon 1250 & 2251 wiring standard).

15. 8.2008
PS Eye - new version
The PBX CMDR / CDR data from RS-232 or IP are stored to various PortStore devices on up to 64 locations.
Data are periodically transferred to the central PS Eye application and stored to separated TXT files to be analyzed in other application.
PS Eye is available also in free version.

7. 8.2008
Damocles MINI 48V
For customers in Telco business we prepared new version of Damocles MINI 48V powered from -48V DC. There is the terminal block connector used for the power. Product OID is 600339.

22. 7.2008
CapTemp & MonTemp
CapTemp and MonTemp are Windows application to monitor sensors, probes and production processes in Food and Pharmacy.
CapTemp logs values into database, displays values, processes conditions and alarms. Alerts to Alarm states are sent by e-mail, or by SMS via a GSM modem connected to the PC.

1. 7.2008
New press release
Ethernet-Controlled Relay: Control 230V / 16A over IP
HWg-ER02a IP Relay is a RS-232 / RS-485 serial line converter with two 230V-rated SPDT relays. The contacts and the serial line can be controlled using the HW VSP (virtual serial port) software, or via the documented M2M protocol. Easily attaches to a suitable panel or a DIN rail

30. 6.2008
UDP Config updated
With new UDP Config you can simply clone device settings. Click right button and use "Download device config" and "Upload device config".

30. 5.2008
AN35: Poseidon – Preventing false alarms
Poseidon monitoring unit sends SMS, e-mail, and SNMP traps whenever a sensor value is outside of a safe range. However, when the temperature or humidity fluctuates, the unit can send tens or hundreds of messages that are unnecessary and bother the user. AN35 describes ways of avoiding false alarms.

26. 5.2008
PortStore2 PL
New version collects call accounting data from a PBX (CDR/SMDR) over a serial line (RS-232). Now RepBuf protocol protect transferred data. New is also periodic TCP Client mode to transfer data from the ADSL network behind NAT (Network Adress Translation).

23. 5.2008
New FW for the Poseidon units
New Poseidon FW (available for all models) changing Alarm notification Email format.
New function is Alarm notification delay (for SNMP Traps & Emails). Download firmwares from the Poseidon XXXX page.

21. 5.2008
IP Relay HWg-ER02a
IP Relay ER02a is a RS-232 / RS-485 serial line converter with two 230V-rated SPDT relays. The contacts and the serial line can be controlled using the free HW VSP (virtual serial port) software, or using the documented M2M protocol.

2. 5.2008
M1 Monitor One starting guide
Ten pages PDF with recommended first steps for M1 users. M1 Monitor One is NMS (Network Monitor System) based on SNMP. There is alse related starting guide in Flash video available.

25. 4.2008
PD Trigger
PD Trigger is a Windows application that receives alarms from Poseidon and Damocles units, and performs simple actions such as displaying a warning message, sending a SMS, or activating a remote output. Alarm alerts are received via SNMP traps. Alarm types are evaluated by conditions and appropriate actions are performed.
PD Trigger can, to a limited extent, replace monitoring (NMS) or control (SCADA) systems.

23. 4.2008
New Press release
PD Trigger is a Windows application that reacts to SNMP traps with alarm alerts. Alarm reactions are configured similarly to e-mail processing rules. Available actions include displaying a pop-up, launching applications, activating outputs, and sending text messages over a GSM modem.

10. 4.2008
3. party IT NMS applications
Mare than 19 3. party SW applications you can find in the third party SW for Poseidon & Damocles product families overview..

7. 4.2008
TIRS.NET support Poseidon a Damocles
Poseidon and Damocles products are supported in small SCADA system TIRS.NET from Coral s.r.o. Demoproject available.

14. 3.2008
HW group on AMPER 2008
AMPER 2008 exhibition: 1. to 4.4.08
HW group & HW server stand 4B3 - Hall 3.

11. 2.2008
New press release
Start measuring right now over E-mail, SMS, SNMP
“Poseidon 3265 GSM2 Tset” is a start-up set for monitoring up to five temperature and humidity values, with output sent by e-mail, by SMS to a GSM phone, as well as to a SNMP-enabled NMS.

24. 1.2008
AN34: Examples of using Poseidon Industrial Bus
The AN34 application example details the use of the Industrial Bus (RS-485) for connecting sensors to a Poseidon 1250 or 2251 unit. It describes in detail the wiring of cables and connectors, as well as the DIP switch settings for supplied accessories.

4. 1.2008
AN33: M1 – Closing a remote relay contact upon NMS alarm
Poseidon, in conjunction with the M1 a.k.a. Monitor one software, can be used to close a relay contact if a preset value (temperature, humidity, etc.) is exceeded. This AN describes one of the possible methods

2. 1.2008
PowerEgg
PowerEgg is designed to detect and/or disconnect 110 to 230V AC mains voltage. The controlling and controlled circuits are electrically isolated. Low-voltage, closing contacts are used for detection indication and output control.

14. 12.2007
AN32: M1 - SMS notification from a NMS
The M1 (Monitor one) is a monitoring software for Windows that works with SNMP-enabled devices. The M1 software allows to send a text message (SMS) containing a specified text. The SMS is sent via a GSM modem connected to the computer, through the use of an external utility.

3. 12.2007
M1 - Monitor One
Download the free version of M1, or order special economical licence X-type for 20 IP address monitoring. M1 is NMS (Network Monitoring System) for SNMP based IT infrastructure monitoring.

20. 11.2007
Temp-Rack19
New temperature sensor for IT bus is Rack 19" (cabinet) mountable sensor. It can be installed as 1U device on the side of the cabinet.

13. 11.2007
AN31: What's New in Poseidon XXXX Firmware
On November 1, 2007, HW group released a cumulative update for all supported Poseidon models. This Application Note 31 describes firmware improvements and changes for individual models.

12. 11.2007
New FW for the Poseidon family
Poseidon 1250: FW ver. 1.9.8
Poseidon 2251: FW ver. 2.2.8
Poseidon 3262: FW ver. 3.0.5
Poseidon 3265: FW ver. 3.0.4
Poseidon 3266: FW ver. 3.0.6
Poseidon 3268: FW ver. 3.0.6
New functions and changes will be published in the AN31.

5. 11.2007
Third party SW for Poseidon & Damocles
Orient yourself in the SW solutions for our Poseidon and Damocles products. You can use our simple orientation list with main tested SW in defined cathegories.

24. 10.2007
Poseidon 1250 manual update
The detailed manual for the Poseidon 1250 was extended for new applications and bus wiring examples. Latest XML format description updated.

28. 9.2007
HW VSP3
A new version of HW VSP – version 3 – again freeware and lets you create a Virtual Serial Port (e.g. Com 17) to connect, for instance, a weather station over the Ethernet. Even in Windows Vista.

11. 9.2007
AN30: Poseidon & Damocles Installation Wizard
Installation Wizard simplifies the use of Poseidon and Damocles products in your applications. Simply call the wizard from within your application to add, remove or configure a Poseidon or Damocles unit.

15. 8.2007
Temp-485-Pt100 version Frost
Temperature probe for extremely low temperature measurements, equivalent to "Cable" version. The probe for measurements from -190°C and connecting cable are part of the supply. ..sensor photo

8. 8.2007
Press Release: RACK MONITORING: Monitor important facts
Poseidon 3266 will add temperature values, open door detection, fan failure or power supply failure to your NMS (Net Monitoring System).