;Recommended configuration for the remote serial port device.
;It's RS-232 Setup listing from the Charon 1 module


********** WEB51 v2.A ***********
MAC Address                00:0A:59:00:9B:0B
=========== IP Setup ============
I: Address                 192.168.6.21
J: Port                    23
M: Mask                    255.255.255.0
G: Gateway                 192.168.6.254
===== In IP access filter  ======
W: Address                 0.0.0.0
N: Mask                    0.0.0.0
X: Port                    0.0
Y: Port Mask               0.0
== Active (Client/Server) mode ==
S: Send to IP              PASSIVE mode
U: Port                    4023
T: IP mode                 TCP
V: NetworkVirtualTerminal  On
K: Keep connection         Off
E: Erase buffer on         None
Press <Enter> to continue
========= Serial Setup ==========
&B: Speed                  9600
&D: Data bits              8
&P: Parity                 NONE
&V: Variable Parity        Off
&S: Stop bits              1
&C: Flow Control           NONE
&R: RS485/RS422 control    RTS = Low [+8V]
&T: Serial Line Timeout    0 - Off
&G: Char. Transmit Delay   0 - Off
&H: Tx Control             Tx FULL duplex
&O: Buffer SpaceCompresion Off
======== Security Setup =========
%A: TCP autorisation       Off
%K: TEA key 0:01:02:03:04 1:05:06:07:08 2:09:0A:0B:0C 3:0D:0E:0F:10
%S: TCP/IP setup           On
============  Other  ============
D: Load/Save Settings from/to Flash
R: Reboot