| Ethernet port |
|
| + Interface |
RJ45 (10BASE-T) – 10 Mbit or
10/100 Mbit network compatible |
| + Compatibility |
Ethernet: Version 2.0/IEEE
802.3 |
| + Supported protocols |
IP: ARP, TCP/IP, NVT,
RFC2217, UDP/IP |
| |
| Serial
port 1 DB9F |
| + Data bits |
7 or 8 or 9 |
| + Stop bits |
1 or 2 |
| + Parity |
None / Odd / Even / Mark /
Space |
| + RS-232 interface |
RxD,TxD,RTS,CTS,GND |
| |
| Relay load |
| + Max. load of the
contacts |
max. 24V / 16A DC; max. 250V / 16A AC |
| |
| Environmental
conditions |
| + Operating
temperature |
-5 to +50 °C |
| + Storage
temperature |
-5 to +75 °C |
| + Humidity
(non-condensing) |
5 to 95 % |
| |
| LED
Status indicators |
+ POWER (green) |
GREEN – power supply turned on |
+ LINK & Activity (green) |
GREEN - Ethernet connection |
+ RxD/TxD (green/red) |
Green – RS-232/RS485 receiving activity
Red – RS-232/RS485 transmission activity |
+ RS-485 (green) |
RS-485 Actived |
+ Relay 1 (red) |
Relay 1 closed |
+ Relay 2 (red) |
Relay 2 closed |
| |
| DIP
SWITCH configuration |
+ DIP1 - RS-232 Setup |
ON = RS-232 Setup mode (9600 8N1)
OFF = Ethernet mode |
+ DIP2 - Remote Input |
ON = RS-485 Enabled
OFF = RS-485 disabled |
+ DIP3, DIP4 |
RS-485 termination |
| |
| Physical parameters |
|
| +
Voltage requirements |
12-30 V/ 150 mA DC- coaxial connector (barrel), GND on the shield, terminal |
| + Dimensions |
145 x 90 x 45 [mm] (H x W x D
) |
| + Weight |
225 g |
