| Revision |
Date publition |
Changes |
|---|
|
1.8.9 |
15.10.2006 |
Remove Config Page |
|
1.8.8 |
08.08.2006 |
- Added Master Reset Function. If changed state DIP1 during the first 5 seconds IP WatchDog restores all factory configuration |
|
1.8.7 |
27.07.2006 |
- Fix bug at work with time
- First Stable version in highly exposed networks without periodic reboot |
|
1.8.6 |
11.07.2006 |
- Fix LED's function |
|
1.8.5 |
10.07.2006 |
- Added internal periodic reboot function for enhancement reliability in highly exposed networks
- Change timeout for automatic reboot after D0 and R
- Fix problem with periodic reboot function
- Added stack overflow control function
- Fix rxi5 thread for enhancement reliability in highly exposed networks (P2P, etc )
- Added control message
- New version OS
- Upgrade event managment
- FIX control message statement in XML log |
|
1.8.4 |
28.03.2006 |
- Fix automatically reboot problem after new firmware upload
- Added ConfigPage for save and restore user's configuration - Function in construction - not functional |
|
1.8.3 |
19.03.2006 |
- Change priority internal's rebooting process after D0 or R parameters on TCP or Serial Setup
-Fix Timeout automatically reboot |
|
1.8.2 |
18.03.2006 |
- Change default value Waiting for first living pulse after start up IP-WatchDog parameter to YES |
|
1.8.1 |
12.03.2006 |
– To AdminPage added parameter "Waiting for first living pulse after start up IP-WatchDog" deciding whether, after IP WatchDog’s startup, to wait for monitored device’s response before causing resetor not. |
|
1.8.0 |
07.03.2006 |
– Added action logging into XML file |
|
1.7.9 |
28.02.2006 |
– Corrected default IP address value to 192.168.1.60 |
|
1.7.8 |
24.02.2006 |
– Improved running IP WatchDog at startup with default configuration. Now, when DHCP function is ON, but there is no IP Address assigned to it (DHCP server not found, not working etc.) IP WatchDog will use default IP 192.168.0.2
– Added system lists about the DHCP client function in Setup Page. - Enabled - OK - DHCP enabled, configuration assigned
- Enabled - failed!!!: Configured by UDP Setup - DHCP enabled, configuration failed, default IP sed
- Disabled: Configured by UDP Setup – Fixed IP address configured
|
|
1.7.7 |
24.02.2006 |
– Improved MAC address problem
– Addedd LED attendance at Manual Control
– Added password-protected system menu
– Forbidden using two identical IPs for Outgoing Ping at different channels
– Added WatchDog’s freezing protection during packet loading at extreme configuration of Outgoing Ping.
– Disabled waiting for first “live” impulse in case of internal IP WatchDog’s reboot |
|
1.7.6 |
19.02.2006 |
– Forbidden dual Ping, when primary and secondary IP of Outgoing Ping are the same
– Improved SW restart from TCP or Serial Setup (In some cases did not end) |
|
1.7.5 |
17.02.2006 |
– Improved functions for ARP |
|
1.7.4 |
15.02.2006 |
– Added alert window in case of extreme Outgoing PING parameters |
|
1.7.3 |
08.02.2006 |
– Added ManualControlfunction |
|
1.7.2 |
03.02.2006 |
– Solved problem with assigning MAC addresses at startup
– Operation system Upgrade, necessity |
|
1.7.1 |
24.01.2006 |
– Improved handling with EEPROM at firmware loading
– Added control of network parameters |
|
1.7.0 |
15.01.2006 |
– Raised UDP Setup’s priority |
|
1.6.9 |
21.12.2005 |
– Change password for secret menu |
|
1.6.8 |
26.11.2005 |
– Added new Incoming HTML Page method
– Changes in terminology |
|
1.6.7 |
03.11.2005 |
– Changes in terminology, solved problem with starting DHCP |
|
1.6.6 |
22.10.2005 |
– Changes in UDP Setup according to AN20
– Added special mode at Reboot Hold Time=0 |
|
1.6.5 |
20.10.2005 |
– LiteMode Support |
|
1.6.4 |
05.10.2005 |
– Added obligatory “live impulse” after IP WatchDog’s start |
|
1.6.3 |
15.09.2005 |
– Wrong CEST configuration, two-hour offset |
|
1.5.2 |
12.09.2005 |
– Added DIP3 security |
|
1.5.0 |
23.08.2005 |
– First public version
– Incoming HTML Page not working |
