Go to the Index page
Main page Products News Software Support Where to Buy SiteMap
Index >> Products >> Poseidon family

The Poseidon model 3262 is simple and autonomous devices which can send an Email when temperature or humidity exceeds defined range. As well as Email, the device can send SNMP Trap to the NMS. Values and configuration are available from WWW graphic interface, sensor's values over several network protocols (SNMP, XML, Modbus/TCP and others).

The Poseidon model 3262 notifies the service of crisis situation (temperature or humidity out of safe range) in several methods. It sends Email or connects to your NMS (Network Management Software) over SNMP.

Poseidon 3262 supports up to 6 connected sensors for temperature and humidity monitoring. Each sensor monitors safe range. In case the value exceeds the range (Alarm status) the device notifies service via SNMP trap or Email.

The sensors are connected over total wiring length of 10 meters, standard phone cables and RJ11 or RJ12 are suitable

>> Poseidon 3262 Tset

photo1   photo2    photo3    photo4

Poseidon 3262 Flyer

>> Sample ordering

Application

  • Monitoring of working conditions (temperature and humidity) of ICT technologies (server, safety and phone systems, etc.)
  • Monitoring of server rooms, air-conditioned 19“ racks, switch-boards and servers
  • Monitoring of back-up power sources, UPS and Diesel engines
  • Monitoring and logging of conditions in storage buildings, cold-storage buildings, freezers and fridges (food and pharmacy industry)
  • Extended intelligent buildings – air-condition and heating optimalization, long term monitoring of living conditions
  • Air-condition working monitoring, monitoring of evaporated water leaking

What the Poseidon 3262 measures

The sensors are connected over 1-Wire bus (RJ12), total wiring length must not exceed 10 meters. Each sensor monitors value including safe range. The Poseidon notifies of safe range exceeding via sending Email or SNMP trap.

The Poseidon model 3262 supports up to 6 connected sensors.

Note: In case you need to connect other sensors, see model overview: Poseidon model XXXX

 

Compatible sensors

  • Temperature - Temp-1Wire (detailed photo)
    Temperature sensor, different connecting cable lengths according to order number: 600 005 = 3m, 600 242 = 1m, 600 056 = 10m)
  • Humidity - Humid-1Wire (detailed photo)
    Humidity sensors,different connecting cable lengths according to order number: 600 279 = 3m, 600 278 = 1m)

 

>> Value sensors

 

Basic features

  • Does not need any specialized SW.
  • Configuration and actual values accessible over simple graphic interface (web browser) - screen shot
  • It can be connected to every building monitoring system, industry and IT networks
  • Support and plug-in modules for many NMS applications (LoriotPro, HP OpenView, Nagios, IBM Tivoli, SNMPc, MRTG and others).
  • Notification of Alarm status via Email or over SMTP, SNMP Trap or SMS (external GSM modem).
  • Open communication protocols (SNMP, XML, Modbus/TCP and others)
  • Every sensors has unique ID
  • Safety protected with password, IP address range, HW protection against configuration changes
  • Temperature and humidity sensors in different construction and cable lengths (1 / 3 / 10 meters).
  • Several support programs and utilities (Pos-Excel, PD Trigger and others)
  • We supply programs for food industry (CapTemp), IT monitoring (M1) and others
  • OEM =  Original Equipment ManufacturerFor OEM partners offer to change device name, web page design, list of contacts and others for order of 50 pieces and more
  • SDK (Software Development Kit) development library + examples (VB, Delphi, C, C#)
  • FirmWare update over WWW or RS-232.
  
>> Poseidon model XXXX - models overview
     

Download and links

 

Topology

SNMP Traps Big image Web XML SNMP SNMP Traps

 

  • WEB (HTML)
    Values and state of sensors are presented on WWW page. The page is automatically reloaded every 5 second. There is a link to Flash Setup from main HTML page, update FirmWare and others
  • XML
    All sensor's values as well as alarm status information are available from XML files (temper.xml) and any application can log it from XML tags - more information
  • SNMP
    SNMP is protocol for monitoring of telecommunication devices, network infrastructure and related technology. The Poseidon is fully controllable over SNMP (v1, partially v2) - more information
  • Modbus/TCP
    Modbus/TCP is industrial standard for input from sensors and output to visualizing and SCADA systems. All values are available over Modbus/TCP - more information

  •  
  • Alarms
    • SNMP Traps
      Exceeding value out of "Safe Range", the sensor gets to Alarm status. To notify of this status the device sends SNMP Trap including alarm description to configured IP address - more information
    • Email
      Exceeding value out of "Safe Range", the sensor gets to Alarm status. To notify of this status the device sends Email including alarm description - more information

>> Poseidon – communication protocols .

HW interface

Overview of all sensors in our assortment: Sensors and accessories

  • RS-232
    Interface for configuration and GSM modem connecting
  • 1-Wire
    Inexpensive interface to connect up to 10 temperature sensors over a total distance of maximum 10 meters

>> Interface to connect sensors to Poseidon units  

 

Technical specifications

  • Port 1: Ethernet RJ 45 - 10BASE-T / 10 Mbit/s
  • Port 2: SENSORS - 1-Wire bus (RJ12)
  • Port 3: RS-232 serial port for Serial setup or to connect GSM modem
  • Power supply: 12V DC
  • Device setup:
    • Locally - RS-232 Setup
    • UDP Setup
    • Over WEB - graphic interface Flash setup
    • Over SNMP  

Port 1 - Ethernet port  
+ Interface RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible
+ Supported protocols IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP)
+ SNMP compatibility Ver:1.00 compatible, some parts of the ver 2.0 implemented
 
Port 2 - 1-Wire sensor bus  
+ Connector RJ12 (6 pins - 4 pins used only)
+ Sensors / distance model 3265 - max. 5 sensors, up to 10 m total
 
Port 3 - RS-232  
+ Connector Cannon 9 male (DB9M)
+ Pinout Standard IBM PC (RxD,TxD,RTS,CTS, GND)
+ Usage Serial setup
+ Max distance Up to 15 m
 
LED Status indicators
+ POWER Green - power OK
+ LINK & Activity Yellow- Ethernet connectivity
 
DIP SWITCH configuration
+ DIP1   - RS--232 Setup mode ON   = RS-232 Setup mode
OFF = Run mode
+ DIP2   - Security ON   = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled
 
Physical parameters  
+ Voltage requirements 9 - 15V / 250 mA DC
coaxial power connector (barrel), GND on the shield
+ Dimensions 35 x 101.6 x 76.2 [mm] (H x W x D )
+ Weight 150 g
 
Functional parameters  
Device SETUP configuration possibilities - RS-232 Setup - over any RS-232 terminal 9600 8N1
- UDP Setup - IP address assign via UDP with using PN Eye
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters)

What SW to use

Tested together with the Poseidon

HW group or our customers verified functionality of the Poseidon with:

>> Software for Poseidon family

 

 

Sample ordering

  • Order samples

    Spam protection. How many is five times six?

    Name: 
    Company: 
    Email: 
    Phone: 
    Country: 
    Address:

    How long it takes to supply ordered samples?
    We keep the Poseidon units permanently on stock and supply them during 24 to 48 hours.
  • What guarantee you offer?
    Standard is 2 years, it can be extended after agreement.
  • Where do I get prices?
    From our distributors, or request the price from HW group (Email or form).   
  • How to find out price of the Poseidon, sensors and accessories for my project?
    Email us (see Contacts) or use Demand form. Fill in number of sensors, individual distance and what values exactly you intend to measure. Do not forget to mention what SW you will use for data processing or what you expect from the program. Tell use where you are from, we may recommend you installation company in your surroundings
  • Can I pay by a payment card?
    Yes but not online. Fill in the online order form, print it out. Write your payment card detail, sign it and fax it to our fax number. The other possibility is to pay via bank transfer.
  • How do you supply the order?
    We use several transport companies and FedEx for express shipments.



>> How to order products

>> Fill in Online order form

 

Ordering number

OID Type description
600 166
>Quotation
Poseidon model 3262 (photo)
600 257
>Quotation
Poseidon 3262 Tset (photo)
Recommended start set Poseidon model 3262, power adapter and one temperature sensor

 

Poseidon model 3262 accessories

 

>> Ordering

 

Similar and related products

 


  Main page Products Support & Download Pricelist Contacts SiteMap  


HW group - Prague - Czech republic - Europe