HWg IP Serial products

English version

		TCP Client	TCP Server	Flash Buffer	VSP	Box-2-Box
RS-232 (serial port)	PortBox, IP Relay, I/O Controller			-
RS-232 (serial port)	PortStore
RS-485 (serial port)	PortBox, IP Relay, I/O Controller			-
RS-485 (serial port)	PortStore
DI (Digital Inputs)	I/O Controller			-	-
DI (Digital Inputs)	Poseidon, Damocles	-	-	-	-
DO (Digital Outputs)	I/O Controller			-	-	-
DO (Digital Outputs)	Poseidon, Damocles	-	-	-	-	-
DO Relay 110/230 V	IP Relay			-	-	-

IP Relay

Remote serial RS-232/485 port with 2 relays for 230V AC, DIN rail mountable housing. Simply control serial port and two relays through Telnet.

2 DO (relay rated at 110 or 230V/16A)
RS-232/485 (remote serial port)
Can be used as a remote serial port with additional relay outputs
TCP Client/Server mode
Windows Virtual Serial Port available

PortStore xxxx - Matrix model overview

Ethernet to Serial with 2 or 32 Mb flash buffer for serial data. Simply Terminal server with flash backup for serial data.

Serial data buffered up to 32 Mb when network not available
Can replace or be used in paralel with current serial printer
PortStore3 can deliver data via telephone line
PortStore can be placed behind NAT (home ADSL line) - works as TCP client
PS Eye application deliver data from up to 100 remote serial ports to 100 text files

I/O controller xxxx - Matrix model overview

Serial port to Ethernet + I/O pins in one box. Control remote DI/DO & RS-232/485 over Telnet.

2-8 DO (Digital Outputs )
0-12 DI (Digital Inputs)
RS-232/485 (remote serial port)
DIN rail housing available
TCP Client/Server mode
Windows Virtual Serial Port available

PortBox

Converts a RS-232 or RS-485 line to Ethernet, using TCP/IP and UDP/IP. The remote serial port can be mapped as COM7 in Windows using the HW VSP (Virtual Serial Port) utility.

RS-232/485 (remote serial port)
Support 9-bit data transfer extensions
TCP Client/Server mode
Windows Virtual Serial Port available

Embedded modules

x51 MCU products

Development products with a 8051-based microcontroller. We recommend to use our ready-made applications, such as the Terminal server.
Products can be programmed in assembler or in C; however, in C, only UDP communication is supported and there is no RTOS (Real Time Operating System) support.

Charon 1 module – Module only
Embedded serial port to Ethernet converter (RS-232 / TCP/IP), 8 I/O pins controlled over TCP.
Charon 1 module – Development Kit
Development kit for the Charon I module. The module itself is included.
Contents: 1x Charon 1 module, development board with RS-232 and Ethernet, cables, documentation.

AVR MCU products

Development products with an Atmel AVR based microcontroller. C is supported. Development kit examples use Nut RTOS (Real Time Operating System) and the TCP stack from the Ethernut project.

Charon 2 module
Embedded module with an ATmega CPU. Compatible with the Ethernut project.
Modules: Charon 2M, Charon 2E
Charon 2 – Development Kit
Complete development environment for the Charon 2 module and the Ethernut project. Supplied as a complete development kit with a small HW STK500 programmer, LCD, 1-Wire thermometer, etc.).
SP Duo
Recommended accessory to the Charon 2 DK set - ATmega programmer working over RS-232 using SPI or JTAG interfaces. Supported by all recent versions of AVR Studio.