WLD sensing cable A - 2+10m

Water leak detection cable A - 2+10m for use with HWg-WLD and HWg-WLD Relay.

Features: 
  • Detection cable A - 2+10m (2m connection cable + 10m sensing cable + end termination)
  • Detects even the smallest volume of liquid (Detection of water, ethylene glycol or other conductive liquid)
  • Water detection in the whole range of the detection part
  • Sensor can be connected to HWg-WLD or HWg-WLD Relay
  • Detection cables can be combined and prolonged to up to 85 meters
  • Soaked detection cable can be dried and reused
Applications and usage: 
  • Universal water detection in any environment
  • Can be put on the floor, wrapped around pipes or attached to a wall.

Horizontal menu

Water leak detection cable pack for use with HWg-WLD and HWg-WLD Relay. Consists of connection cable 2m (600464), 10m Detection cable (600465) and an end termination.

The sensing cable detects even the smallest volume of water, ethylene glycol or other conductive liquid anywhere on the total length of the cable and a soaked water detection cable can be dried and reused.

The cable can be prolonged to up to 85m of detection cable and 100m of prolong cable (185m in total) using the following components:

  • Water sensing cable WLD - 2m
  • Water sensing cable WLD - 10m
  • Water sensing cable WLD - 50m
  • Prolong cable - 5m

Recommended products

WLD A prolong cable 5m

Prolong non-sensitive cable 5m for WLD type A. Can be extended to up to 100m in total.

Sensor WLD Relay 1W-UNI

A universal water flood sensor detects flood occurence by soak-detecting cable.

WLD2

WLD2 is a WiFi / Ethernet water leak detector with support for WWW, SNMP and PoE. To detect leaking liquids, it uses 4 sensing cables

SD-WLD

SD-WLD is a water leak detector with Ethernet and WiFi that detects the presence of water using a sensing cable.

NB-WLD

NB-WLD is a water leak detector with Narrowband IoT connectivity. It uses a very sensitive detection cable.