- 50m detection cable for prolonging the sensing part of a cable between connection cable and an end termination
- Detects even the smallest volume of liquid (Detection of water, ethylene glycol or other conductive liquid)
- Water detection in the whole range of the sensing part
- Sensor can be connected to HWg-WLD or HWg-WLD Relay using a connection cable
- Detection cables can be combined and prolonged to up to 85 meters
- Soaked detection cable can be dried and reused
- Universal water detection in any environment
- Can be put on the floor, wrapped around pipes or attached to a wall.
50m water leak detection cable for use with HWg-WLD and HWg-WLD Relay. Connection cable and an end termination 600 464 required.
The sensing cable detects even the smallest volume of water, ethylene glycol or other conductive liquid anywhere on the total length of the cable and a soaked water detection cable can be dried and reused.
The cable can be prolonged to up to 85m of detection cable and 100m of prolong cable (185m in total) using the following components:
- Connection cable
- Water sensing cable WLD - 2m
- Water sensing cable WLD - 10m
- Prolong cable - 5m
Prolong non-sensitive cable 5m for WLD type A. Can be extended to up to 100m in total.
A universal water flood sensor detects flood occurence by soak-detecting cable.
WLD2 is a WiFi / Ethernet water leak detector with support for WWW, SNMP and PoE. To detect leaking liquids, it uses 4 sensing cables
SD-WLD is a water leak detector with Ethernet and WiFi that detects the presence of water using a sensing cable.
NB-WLD is a water leak detector with Narrowband IoT connectivity. It uses a very sensitive detection cable.