STE2 rev.2 / SD devices

• Mod: New logo for STE2 r2
• Add: Support for low power sensors

• Add: support for up to 5 sensors
• Add: 1-Wire UNI sensor support
• Add: sensor status flag in push log
• Fix: of possible memory leak when generating the certificate
• Fix: character care using escape sequences in values.xml
• Fix: edit site, freeze fields when DHCP is on / off
• Mod: increase the length of the username and password fields in smtp
• Mod: xml parser. Newly, the removal of the Esc sequence is performed directly during the parsing process and not during processing
• Mod: disable display of hidden wifi networks
• Mod: autopush method
• Mod: outputs are assigned to the AutoPush. A local change in the value of the output caused a AutoPush
• Mod: a change in the output value from the sensdesk triggered a AutoPush to let the portal know about the changes

• Fix: increased the length of the username and password field for smtp to 32 characters
• Fix: SNMP, now responds to the interaction from which the packet came
• Fix: wifi reconfiguration when changing certain wifi parameters
• Fix: display of sensor type on portal.xml page
• Mod: end of time parsing from the sensdesk via info message

• Mod: new default push period 300sec
• Mod: redesign of a uniform push time, from which the individual log entries are offset
• Fix: getting the sensor driver when sending data to the portal, so it does not interfere with the operation of the sensor
• Add: SD-4-20mA product support
• Mod: setting the datalog send flag when it is not empty after pushy
• Mod: disable datalog deletion after check pushy
• Mod: setting the logging flag for pushy only when retransmitting == 0, and pushy not triggered by a check period or event of sending the rest of the datalog
• Mod: correction of sending inaccurate values Value, min, max, hyst, ap_delta at exponent less than -1
• Mod: change of work with sensor units (UNI sensor units did not promote the system)
• Fix: freezing portal datalog, reaching beyond its poartition
• Add: import and export from SPI flash portal datalog
• Add: web push indicator
• Mod: change the way the status.xml download is suspended on the web
• Add: Calibration for SD-4-20ma (exponent and linear interpolation in 8 point)
• Mod: Tuning of SD4-20ma sensor values
• Fix: Autopush - When the sensdesk was unavailable, it pushed (and therefore logged)
• Fix: Inserting time from sensor board into retransmit, when push error was wrong device time

• Canceled Autopush setting for digital inputs on Portal page. Now depends on the "Alarm Alert" option the Inputs page

• MOD: Extend the field by e-mail to 64 characters
• Fix: LED operation inside 1-Wire connectors
• Fix: Change the time synchronization period on the Time page
• Minor modifications and improvements to the WWW

• Add: long pushlog (256kB)
• Mod: design HTML pages
• Fix: Sending values with correct exponent in HWg-Push
• Add: Outputs to the values.xml

• Fix: Flood detection on SD-WLD
• Fix: Undefined state between Normal and Flooded on SD-WLD and WLD2
• Add: Support for counters on inputs (SD-2xIN)
• Add: SD-4-20mA support
• Add: Calibration table for SD-4-20mA
• Add: Internal calibration page SD-WLD
• Add: Support for FRAM memory (counters support)
• Add: Listing of wifi modem status to setup.xml page
• Mod: HTML, JavaScripts and CSS on Alarms.xml page
• Fix. Improved link on portal.xml page, so from dynamics it refers to address according to field server address and ip port

• Fix: Sending Push message when Alarm Start or Alarm End

First public release

Fix: Support 1-Wire UNI for SD Devices

• Mod: Change XML version for HWg-Push protocol from 4.02 to 4.03. The change is backward compatible => Push Protocol Variable Extension: [r/w] Portal/Team, Portal/TeamPass and [ro] Agent/ConfigSaveTime