Poseidon2 / Damocles2

  • MOD: Recover TCP connection of MQTT protocol after loss of connectivity
  • MOD: Slower search for sensors after device Start-UP - this does not replace the sensors search on page Sensors, it only allows to determine on which ports the sensors are connected to
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.4.9.(9)

3.4.9.(9)11/08/2018 - 16:24744.27 KB

Fix: Repair calculating IP address and mask in IP Stack

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.4.8.(8)

3.4.8.(8)10/12/2018 - 08:36744.29 KB

Fix: Repair uptime overflow after 49,71 days

 

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.4.5.(5)

3.4.5.(5)07/03/2018 - 07:57742.29 KB
  • MOD: Recover TCP connection of MQTT protocol after loss of connectivity
  • MOD: Slower search for sensors after device Start-UP - this does not replace the sensors search on page Sensors, it only allows to determine on which ports the sensors are connected to
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.4.3.(3)

3.4.3.(3)04/05/2018 - 07:09742.07 KB

The changes in default configuration is affected the backward compatibility.

  • Fix: reading Modbus/TCP registers with counters => convert to 2x 16bit (32bit value in sum)
  • Mod. Disabled TCP setup (telnet) in default configuration
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.4.2.(2)

3.4.2.(2)03/14/2018 - 15:12742.16 KB
  • Fix: SNMP - If Community was not selected, the device responded to a request without a Community. Now Community must be selected
  • Fix - Fixed macro statement in MQTT
  • Fix: WWW Homepage - Fixed displaing "On if alarm on" in the Outputs view

 

 

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.15.(15)

3.3.15.(15)01/30/2018 - 07:10738.08 KB

MOD: When Alarm is finished on one or more inputs or sensor stop in same time, SMS message has information about all finished Alarms

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.14.(14)

3.3.14.(14)01/03/2018 - 17:40738.04 KB
  • Fix: IPv4 filter
  • Add: Counter state to Push message
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.13.(13)

3.3.13.(13)12/14/2017 - 18:35737.96 KB

Fix: Read state of inputs after Power-UP

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.12.(12)

3.3.12.(12)11/29/2017 - 12:30737.93 KB

The update to new FW version will erase the counter status and the HTTPs certificates imported previously!

  • FIX: XML/XSL transformation in Internet Explorer and Edge
  • ADD: Input`s Counters in Poseidon2 family - all devices
  • MOD: Totally redesigned work with inputs Counters in Poseidon2 and Damocles2 devices
  • FIX: Ajax on Input`s page for reload input values
  • FIX: Changes name of state for inputs with ID > 154 from Unlock/Lock to On/Off
  • FIX: Data saving on General Setup page
  • Add: Enable download SSL private key
  • FIX: Modification od memory map - IMPORTANT! - after upgrade you will lose data about counters and SSL certificates! Read Condition for this release!
  • FIX:  Data saving for Hysteresis values
  • MOD: Totally redesigned upgrade of firmware. Added checksum do every file in filesystem, added CRC
  • MOD: Extension reload timeout after firmware upgrade to 45s
  • FIX: Changing device name from HWg Config  
  • Add: Added possibility change TCP port for Syslog on General Setup page
     
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.3.(3)

3.3.3.(3)08/21/2017 - 09:47732.99 KB

Add: Generate self signed certificate and key
MOD: Internal Watchdog function

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.3.1.(1)

3.3.1.(1)06/26/2017 - 14:26743.5 KB
  • NEW: Syslog settings for each sensor or input
  • MOD. Syslog message  format
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.2.11.(11)

3.2.11.(11)04/05/2017 - 07:40709.2 KB
  • FIX: ModBus/TCP
  • MOD: Length hostname increased to 32 characters
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.2.7.(7)

3.2.7.(7)03/16/2017 - 10:24709.24 KB
  • Fix: Saving hostname
  • Add: User defined Topic in MQTT
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.2.5.(5)

3.2.5.(5)02/06/2017 - 13:16677.49 KB

Fix: Saving variables with index (sensors, DI, DO)
 

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.2.4.(4)

3.2.4.(4)02/03/2017 - 11:06677.51 KB

Fix: Enable/Disable Modbus/TCP

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.2.3.(3)

3.2.3.(3)01/31/2017 - 13:28677.45 KB
  • FIX: Controll Output1 from Sensdesk
  • MOD: NEW SSL/TLS driver
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.0.11.(11)

3.0.11.(11)11/08/2016 - 11:42632.96 KB
  • Fix: freezing after pressing F5 and opening many connection at once.
  • MOD: Faster loading WWW (5 times faster)
  • Add:  support for IPV6 in to UDP Setup.
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.0.10.(10)

3.0.10.(10)11/04/2016 - 11:10632.64 KB
  • Fix: minor issues on WWW pages
  • Fix: WWW pages for browsers Opera and Edge
  • Fix: Communication monitor on Inputs page
  • Mod: Disabled outputs are hidden
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 3.0.9.(9)

3.0.9.(9)11/01/2016 - 14:39632.64 KB
  • Mod: Unified firmware for Poseidon2 and Damocles2 – common functions for both devices
  • Add: Support of HTTPS
  • Add: Support of MQTT
  • Add: Support of IPv6
  • Add: New bookmark "Security" where you can find security functions and manage the HTTPS certificates. The security function such as setting the filter for IP addresses, names and passwords, newly has been added the function to manage the HTTPS certificates
  • Add: 5 positions  for IP Access filter
  • Add: Control of Relay DO (Digital Outputs) from SensDesk portal
  • Add: Virtual outputs to control the outputs from Poseidon2 to Damocles2 and vice versa (Box2Box), the communication goes over TCP/IP protocol and all functions, conditions and characters of physical outputs can be applied.
  • Mod: The extension of the names of binary inputs up to 32 characters
  • Mod: Identical web interface and graphics, easier orientation, reverse compatibility
  • Mod: Unified MIB and XML for both devices – easier implementation into 3rd party systems.
  • Mod: New design of WWW pages - Must refresh pages CTRL+F5
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.4.8.(8)

1.4.8.(8)03/29/2016 - 15:50599.64 KB
  • Add: The number of assigned 1-Wire port added. Function +XML (FW 1.4.7 XML Tag <PortId>) + SNMP (OID 1.3.6.1.4.1.21796.3.3.3.1.11, name sensPortID)
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.4.6.(6)

1.4.6.(6)02/01/2016 - 10:32599.27 KB
  • Fix: Sending SMS alarms for Humidity sensors
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.4.5.(5)

1.4.5.(5)02/17/2016 - 14:20599.29 KB
  • Fix: DHCP renew -  Automatic restart of the device if different IP address is assigned by DHCP server
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.4.4.(4)

1.4.4.(4)01/26/2016 - 13:38600.54 KB

Fix: DHCP Lease

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.4.1.(1)

1.4.1.(1)12/10/2015 - 14:46595.76 KB

Fix: Box2Box mode

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.15.(15)

1.3.15.(15)11/24/2015 - 10:57596.77 KB
  • FIX: Ringout When the Alarm begin
  • Add: Ringout when the Test button is pressed
  • FIX:  Saving the Sync period and the Report Log Period in the Log & Time menu
  • Fix: Set Default Config from WWW – Clear all the sensors
  • ADD: Binary (relay) Output state in HWg-PUSH protocol (Sensdesk)
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.14.(14)

1.3.14.(14)08/24/2015 - 14:45595.73 KB
  • Add: Time zone in minutes
  • Fix: TLS over GMX
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.10.(10)

1.3.10.(10)06/11/2015 - 16:19639.97 KB

FIX: SNMP - Socket client applications should pass zero in initialization
FIX: HTTP - Variable "securityName" should be protected as well
IMP: VER_NUM_STR (msg.h) used as macro with parameters

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.9.(9)

1.3.9.(9)05/22/2015 - 19:59598.6 KB
  • Add: an adjustable synchronization period of time on 1/10/24 hours. Bypasses the need for constant communication preventing the failure of some of switches
  • Mod: Modified behavior of DHCP client. Now it repeating request for allocation of IP addresses after 20, 60, 360, and 900 seconds. Solution for situation when the network boot up before the DHCP server.
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.8.(8)

1.3.8.(8)05/05/2015 - 09:23639.78 KB
  • Add: Modbus/TCP Settings page - Modmus/TCP Enable/Disable and ModBus/TCP port settings
  • Add: Detailed information on System page (Product Name, Serial Number, MAC Address, Build of firmware, Compiled time)
  • Add: Update operating system
  • Fix: Temperature Unit in 1-Wire UNI sensors (Converter 2xPt100 1W-UNI)
  • Fix: Hide passwords on Portal and General Settings page
  • Fix: Password Generation security key (AES128) in SNMPv3
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.4.(4)

1.3.4.(4)03/26/2015 - 08:44634.53 KB
  • Speed-up response of SNMP
  • Fix: added support for non-standard agents SNMPv3 (zero msgAuthoritativeEngineBoots and msgAuthoritativeEngineTime)
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.3.2.(2)

1.3.2.(2)03/03/2015 - 05:40655.45 KB
  • Add: Pulse timer for Outputs
  • Add: SNMPv3
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.11.(11)

1.2.11.(11)07/16/2014 - 14:32626.25 KB

Fix: Sending of false values after power up eliminated

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.10.(10)

1.2.10.(10)07/16/2014 - 14:31625.24 KB

Fix: Monitoring of values below zero with Converter 2xPt100 1-Wire UNI

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.7.(7)

1.2.7.(7)06/24/2014 - 09:47624.45 KB

Fix: Periodic LOG  file format

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.5.(5)

1.2.5.(5)06/13/2014 - 09:34619.5 KB

Fix: Changed Relay1 a Relay2 Output

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.3.(3)

1.2.3.(3)05/12/2014 - 12:32619.05 KB

Fix: Problem with humidity sensors after reconnection fixed.

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.2.(2)

1.2.2.(2)04/28/2014 - 12:54617.76 KB

Add: option to set the internal temperature units

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.1.(1)

1.2.1.(1)04/16/2014 - 15:28606.58 KB

Add: Relay control via SNMP Traps

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.2.0.

1.2.0.03/19/2014 - 16:51605.38 KB

Fix: Sending SMS over netGSM (HWg-SMS-GW or other Poseidon with GSM modem)

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.18.(18)

1.1.18.(18)03/10/2014 - 13:52605.42 KB

Fix parsing of the length in SNMP packet

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.17.(17)

1.1.17.(17)02/25/2014 - 09:59605.43 KB

Fix: Fahrenheit vs. Celsius in Safe Range

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.16.(16)

1.1.16.(16)02/21/2014 - 14:59597.42 KB

New: Tag units in Values.xml

 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.15.(15)

1.1.15.(15)02/19/2014 - 11:08597.47 KB
  • Fix: Temperature Units in HWg-PUSH protocol
  • New: New WWW design
  • New: New button "Set Default Config" in WWW 
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.10.(10)

1.1.10.(10)11/26/2013 - 13:04821.18 KB
Replaced incorrectly compiled version 1.1.9.
For upgrade, enter the page "http://poseidon2_address/upload"
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.1.9.(9)

1.1.9.(9)11/21/2013 - 14:39350.66 KB
Fix data logging in Poseidon 4002 models Add full support HWg Push protocol Move Portal configurations form General Setup to Portal www page Add Manual push button, Portal Message window and autopush options to Portal WWW page Fix values data in spilog.bin endian order Set default GSM modem T35i Add SSL/TLS protocol to email client Fix Enable/Disable DHCP procedure.
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.0.15.(15)

1.0.15.(15)09/16/2013 - 12:59689.03 KB
Fix: binary inputs order Fix: inputs and outputs naming
 VersionRelease dateFile sizeDownload

Poseidon2 / Damocles2 1.0.14.(14)

1.0.14.(14)09/10/2013 - 14:50689.06 KB
First Public release
Undefined

Subscribe for
software releases

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.