Accessories overview - All Accessories

The HW group product portfolio includes three major domains: Environmental, system and process monitoring devices; technology for IP based serial interface system control and data logging and Access Systems.

Power

  • 12V/1.5A Wall plug adaptor INT

    12V / 1.5A power adaptor, International version with three replaceable plugs (EUR, UK, US).

  • 12V power adaptor 3pin ATX

    12V / 2.5A power adaptor, with IEC-320 C14 power plug input.

  • 12V Wall plug adapter – USA

    12V Wall plug adapter – USA

    Product run-out New product Available

  • 12V Wall plug adaptor - INT

    12V / 0.5A power adaptor, International version with three replaceable plugs (EUR, UK, US).

  • 12V Wall plug adaptor – UK

    12V Wall plug adapter - UKUK power adapter 12V DC for devices with 6.3mm barrel jack socket.

    Product run-out New product Available

  • 24V Wall plug adapter - EU

    24V DC power adapter for AirFlow 600304, EU version.

  • 5V Wall plug adaptor INT

    5V / 1.2A power adapter, International version with integrated short and overload protection.

  • PowerStripDC

    DC Power Strip splits 12VDC power from a power adapter to connect other devices (e.g. a flood or smoke detector).

  • UPS 12V

    The "UPS 12V" is a backup power source for devices with 12V DC power supply

  • UPS 12V and 5V

    The "UPS 12V and 5V" is a backup power source for devices with 12V as well as 5V DC power supply which can be powered by the UPS simultaneously.

Converter

HUB/Expander

  • 1-Wire hub Power

    Power-boosted hub for the 1-Wire bus. Compatible with 1-Wire and 1-Wire UNI bus.

  • Poseidon S-Hub

    S-Hub allows connection of RS-485 sensors to Poseidon family units

  • Poseidon T-Box RJ11

    T-Box hub connects sensors over 1-Wire bus to  Poseidon2 a nd Ares10/12 family units

  • Poseidon T-Box2

    Switch for 2x RJ12 sensors. Connection plug is equipped with RJ12 connector,

  • Spider

    Connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon2 4002 via RS-485 (RJ45) bus

Mounting Wall

Cable

Others

  • 1W-UNI USB calibrator

    1-Wire UNI sensors enables setting and calibration of the measured values

  • 2-pin Terminal Block

    2-pin Terminal Block

  • 3-pin Terminal Block

    3-pin Terminal Block

  • Cinterion BGS2T terminal

    The Cinterion BGS2 Terminal is a simple plug and play M2M device that quickly delivers powerful Quad-Band 2G connectivity and TCP/IP connectivity based on GPRS class 10 data transmission with outstanding low power consumption.

  • Connector RJ-45F DN93612

    Connector RJ-45F

  • E-lock BeFo 512

    E-lock BeFo 512 is an electromagnetic lock suitable for the connection to our RFID constructions or coded locks.

  • E-lock XPO-211

    Electromagnetic lock E-lock XPO-211 is designed for installation into rack door systems.

  • GSM SMA antena quadband

    GSM antenna quadband with SMA connector for Ares devices

  • HWg-SH1: H3-EM Electronic Locking Swinghandle

    Southco electronic swing-handle for rack/cabinet access systems.

  • I/O Controller 2 Test board

    A test board for easy setup and debugging of your applications for the I/O Controller.

  • I/O Controller 20 pin connector

    Two 10 pin green connectors for connecting peripherals to a standard I/O Controller2.

  • LTE router LR77 v2 Libratum

    Balanced router LR77v2 Libratum a LTE, non-modular wireless router features high speed data rates 100 Mbps, two Ethernet 10/100 ports and dual-SIM failover capability for mission critical applications.

  • RFID card M1

    RFID Card type M1. White card with HWg logo & printed order code. 

  • RFID reader R3

    RFID reader in standard EM4100 (125kHz) with keyboard and interface of Wiegand.

  • RFID Reader R3 - RJ45

    RFID reader in standard EM4100 (125kHz) with keyboard and interface of Wiegand.

  • RFID tag

    This RFID tag is EM4102 chip with unique code of 64bits.

  • Sensor calibration

    Calibration protocol from accredited laboratory for one physical value in 3 calibration points. (In case you don´t specify the calibration points, laboratory uses the these standard points for temperature and for humidity.

  • SMS-GW3

    HWg-SMS-GW3 is a central text message (SMS) gateway that HWg devices and applications in the same network can use to dial numbers or send SMS alerts.

  • SMS-GW3 LTE

    SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.