Index >> Products >> Monitoring

Poseidon: IP monitorPoseidon XXXX: Remote monitoring sensors over LAN


Czech version


English version

Poseidon devices matrix overview - remote monitoring devices over IP & SMS. Poseidon is system for data-center temperature and environment monitoring. The Poseidon solution monitors (temperature, humidity, electricity supply, access to the room, water leak detector). Alerting works by e-mail, SNMP traps, SMS, output relays.

 

  Poseidon2 3266 Poseidon2 3268 Poseidon2 3468 Poseidon2 4002
Photo Poseidon2 3266
1 2 3 4 5 6 7 8
Poseidon2 3268
1  2  3  4
Poseidon2 3468
1  2  3 
Poseidon2 4002
1   2  3
Online demos Online demo Online demo Online demo Online demo
Digital Inputs (DI) 4 DI 4 DI 4 DI 12 DI
Door contact, Flood (water level) detector, Smoke and gas detectors, Voltage detector, Motion detector
Digital Outputs (DO) - 2 DO
(relay)
2 DO
(relay 110/230V)
4 DO
(relay)
1-Wire sensors
RJ11 bus up to 60m
8 sensors 8 sensors 8 sensors 16 sensors
Temperature, Humidity
1-Wire UNI sensors
RJ11 bus up to 60m
Voltage 0-15V / 0-60V, Current 0-20mA / 4-20mA / 0-30A AC, Light (luminous intensity), Pt100/Pt1000, Water Leak Detection, ..
Industrial sensors
RS-485 bus up to 1000m
- - - 24 sensors
Temperature, Humidity, Air preassure, Voltage, Current
Power 9-30V 9-30V 9-30V / -48V 9-30V
Logger capacity 250.000 records 250.000 records 250.000 records 250.000 records
XML (HTTPs)
Modbus/TCP
SNMP / SNMP v3, SNMP Traps
SMTP Email (TLS)
IPv6
VDO (Virtual Outputs)
Local SMS Alarms
(local GSM modem + SIM card)
- - -
HWg-SMS-GW client
(remote GSM modem support)
www.SensDesk.com
Online portal compatible
HWg-SDK for programmers
(Software Development Kit)
Firmwares Firmware v.3.3.3 Firmware v.3.3.3 Firmware v.3.3.3 Firmware v.3.3.3
Manual Poseidon2 family manual
Previous generation Previous model: Poseidon 3266 Previous model: Poseidon 3268 Previous model: Poseidon 3468 Previous model: Poseidon 4002
Previous model: Poseidon 2250
Configuration SW UDP Config
Application software HWg-Trigger, HWg-PDMS
Third party SW applications Nagios, Zabbix, HP (OpenView) NNM, IBM Tivoli, MSC Operations Manager, The Dude, Paessler IPCheck, Ipswitch WhatsUp, Axence, LoriotPro, GFi NSM, SNMPc 7, CA NSM, ActiveXperts NM, Intellipool NM, ATEAS, AlViS
* Check the power limitation how many sensors can be connected per one RJ11 port (typically max 2 1-Wire UNI sensor per one port)

 

Sensors, Probes & Detectors

 

Accessories

 

1-Wire (RJ11)

  • Poseidon T-Box
    Hub for connecting up to 5 sensors on the 1-Wire bus (5x RJ-11)
  • Poseidon T-Box2
    Hub for connecting of 2 sensors on the 1-Wire bus (2x RJ-11)
  • Poseidon Spider
    The RS-485 line converter to 4x RJ12 1-Wire. Connect four 1-Wire sensors to RS-485.

 

RS-485 (RJ45)

  • Poseidon B-Cable reduction
    It converts RS-485 + power supply for RJ45 connector to terminal board - 4 pins ( A,B,+,- )
  • Sensor RJ45 MIDDLE cable(details)
    Connecting cable about 0.5 meter long, enables to connect 4 pins ( A,B,+,- ) from terminal board to RJ45 connector. Method how to connect the middle sensors.
  • Sensor RJ45 LAST cable(details)
    Connecting cable about 0.5 meter long, enables to connect 4 pins ( A,B,+,- ) from terminal board to RJ45 connector. Method how to connect the last sensor in line.
  • Poseidon S-Hub [600 041]
    RS-485 line hub for 8+1 RJ45 connectors and TP cables. S-Hub can be used as a power supply for all connected sensors.

Keywords

Poseidon XXXX, snmp monitor, remote monitoring, monitoring over IP, measurement temperature, thermometer temp, snmp monitoring, humidity thermometer, temperature loggers, web temperature, snmp, snmp trap, modbus/tcp,
rs-485 sensors, temperature probe, environment monitoring, temperature monitoring system, xml monitor, web remote monitoring, datacenter temperature, computer room temperature, environment monitoring system, e-mail alerts, sms alerts, snmp trap alert

 

Similar and related pages