Sensor overview - Detectors
Primary tabs
The detectors you connect to a DI input (green connector), providing a value of 0/1. A typical example is a smoke detector with a relay output or a door opening detector (door open/closed). The monitoring device (SensDesk) can monitor the switching to the alarm value and send an e-mail or SMS alarm. You can connect detectors with relay output from any manufacturer to the HW group's monitoring device's DI input.
Binary
-
AirFlow sensor 5101
AirFlow sensor 5101, sensor switches relay, when air-flow step up over setting level.
-
Door contact
Detects door opening / closing. It is typically used to extend the functions of access systems or as a detector connected to Damocles or Poseidon2 units.
-
Door contact MK4
Security Door contact MK4 with 2m connection wiring.
-
Product run-out
Flood detector LD-12
A simple contact water leak detector.
-
Gas Leak Detector
Detector for indication of flammable gas presence.
-
Motion PIR Detector
PIR Motion Detector
-
Optical Smoke Detector FDR26
Optical Smoke Detector FDR26 for smoke detection and fire alarm signalisation.
-
Power Detector
Detector of 110/230V voltage failure, which can be connected directly to a wall plug. Galvanic insulated relay output (NO) can be connected to any digital input (DI) of any HW grup product.
-
PowerEgg2
PowerEgg2 detects failures of a power supply and can be also controlled with a relay.
-
Sensor WLD Relay 1W-UNI
A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).
-
Vibration detector SS14
SS14 detects shocks and vibrations.
1-Wire UNI
-
Flood detector 1W-UNI 3m
Water flood sensor (point detection) with 1W-UNI interface.
-
Sensor WLD Relay 1W-UNI
A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).