Sensor overview - Sensors
Primary tabs
1-Wire
-
HTemp-1-Wire Outdoor
Temperature and humidity sensor for outdoor use.
-
HTemp-1Wire 3m
Digital temperature and humidity sensor for indoor and outdoor use.
-
HTemp-1Wire Rack 19
Combined temperature and humidity probe for IT environment.
-
HTemp-1Wire-Box2
Wall mount temperature and humidity sensor.
-
Humid-1Wire (1m, 3m, 10m)
Humidity probe (0 - 100% RH) designed for IT environment.
-
Temp 1Wire Pt1000
The Temp 1Wire Pt1000 is an ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, agriculture and many other industrial applications.
-
Temp-1Wire 3m calibrated - On request
Temperature sensor (-10°C to +80°C)
-
Temp-1Wire IP67 (1m, 3m, 10m)
Temperature sensor with IP67 protection for general use.
-
Temp-1Wire Rack 19
Temperature sensor designed for the IT environment.
-
Temp-1Wire-Flat 3m
A stainless steel temperature probe with a flat cable.
-
Temp-1Wire-Outdoor
Outdoor temperature sensor with IP67 protection
1-Wire UNI
-
100A (30A) DC Current probe 1W-UNI
Sensor for direct measuring of DC current of up to 100A (30A)
-
30A Current probe 1W-UNI 2
30A Current probe 1W-UNI 2
-
Light 1Wire-UNI
Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).
-
Sensor 0-20mA 1W-UNI
Sensor 0-20mA 1W-UNI
-
Sensor 230V AC 1W-UNI
The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.
-
Sensor 4-20mA 1W-UNI
Sensor 4-20mA 1W-UNI
-
Sensor 60V 1W-UNI v2
Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.
-
Temp-1W-UNI Pt100 Cable
Temp-1W-UNI Pt100 Cable
-
Temp-1W-UNI Pt100 Frost
Pt-100 based low temperatures sensor with 1-Wire UNI output.
RS-485
-
HTemp-485 Box2
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.
-
HTemp-485 T3411
Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
HTemp-485 T3419
Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
PHTemp-485 T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.
-
Temp-485 Box2
Temperature sensor for indoor usage at RS-485 bus with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB
-
Temp-485-Pt100 Box2
Temp-485-Pt100 Box2
-
Temp-485-Pt100 Cable3
Temp-485-Pt100 Cable3
-
Temp-485-Pt100 Frost2
Temp-485-Pt100 Frost2
WLD
-
WLD sensing cable A - 10m
Water leak detection cable A - 10m for use with HWg-WLD and HWg-WLD Relay.
-
WLD sensing cable A - 2+10m
Water leak detection cable A - 2+10m for use with HWg-WLD and HWg-WLD Relay.
-
WLD sensing cable A - 2+2m
Water leak detection cable A - 2+2m for use with HWg-WLD and HWg-WLD Relay.
-
WLD sensing cable A - 2+50m
Water leak detection cable A - 2+50m for use with HWg-WLD and HWg-WLD Relay.
-
WLD sensing cable A - 2m
Water leak detection cable A - 2m for use with HWg-WLD and HWg-WLD Relay.
-
WLD sensing cable A - 50m
Water leak detection cable A - 50m for use with HWg-WLD and HWg-WLD Relay.
PT100/1000 Probe
-
probe Pt100 TG8
probe Pt100 TG8
-
Probe Pt100 TR125 2m
Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.