Devices overview - IoT Monitoring

IoT Monitoring are very simple (single-purpose) products. Installation is easy, connect to the LAN, plug the power supply (insert battery) and stick it to the wall. IoT Monitoring products have to be connected to the portal (HWg-cloud for free or any SensDesk from Portal Providers).

Narrowband IoT devices

  • NB-2x1Wire

    4 external RJ11 sensors values to the portal (Temperature, Relative Humidity, Current, ...). Internal battery, NB-IoT cellular network connectivity, portal required.

  • NB-2xIn

    2x DI (Digital Input) for external door / smoke detectors. Internal battery, NB-IoT cellular network connectivity, portal required.

  • NB-2xOut

    2x DO (Relay Output) controlled from the portal. Internal battery, NB-IoT cellular network connectivity, portal required.

  • NB-WLD

    1x Water Leak Detection zone (sensing cable) to the portal. Internal battery, NB-IoT cellular network connectivity, portal required.

SD Devices

  • SD 4-20mA

    1x AI (Analog Input) for external 4-20mA / 0-20mA probes. LAN and WiFi connectivity, IoT Monitoring unit (Portal required).

  • SD-2x1Wire

    4 external RJ11 sensors values to the portal (Temperature, Humidity, Voltage, ...). LAN and WiFi connectivity, IoT Monitoring unit (Portal required).

  • SD-2xIn

    2x DI (Digital Input) for external door / smoke detectors, S0 counters. LAN and WiFi connectivity, IoT Monitoring unit (Portal required).

  • SD-2xOut

    2x DO (Relay Output) controlled from the portal. LAN and WiFi connectivity, IoT Monitoring unit (Portal required).

  • SD-WLD

    1x Water Leak Detection zone (sensing cable) to the portal. LAN and WiFi connectivity, IoT Monitoring unit (Portal required).