Software overview - HW group


  • HWg-Config / UDP Config

    The HWg-Config utility assign IP addresses to all HW group network devices. It searches network, find devices, show their unique MAC address and enables you to setup IP, MASK and GW of network devices.

  • HWg-PDMS

    Windows application for collecting data from sensors and inputs over GSM (HWg-Ares) and LAN (Poseidon, Damocles, HWg-STE, HWg-PWR). Export of data in the background. Simple data processing and analysis in MS Excel.

  • SensDesk

    SensDesk is an Internet service where you can connect your sensors, monitoring devices. From a single interface, you can manage all of your devices, monitor the status on a map, compare trends of variables in time, and process alarm alerts.


  • HWg-Trigger

    HWg-Trigger is a Windows software utility that alerts to a failed device (out of 10 listed), starts applications, or redirects alarms to text messages (SMS). An action (e.g. displaying a pop-up message) can be assigned to each condition (e.g. a sensor rea

IP Serial

  • HW VSP3 - Virtual Serial Port

    HW VSP is a software driver that adds a virtual serial port (e.g. COM5) to the operating system and redirects the data from this port via a TCP/IP network to another hardware interface, which is specified by its IP address and port number.

  • IPRC (IP Relay Control)

    IP Relay Control is a software designed for working with the IP relay device. You can control the relay contacts with a single click. The IPRC is a single executable, there is no need to install.

  • IPRC cmd

    Windows/Linux command-line application for controlling (relay) outputs.

  • PortStore2 Downloader

    Windows and Linux utility for command-line for download the data from PS2 with the autodetection of PortStore2 PL configuration.

  • PS Eye

    PS Eye is an application for collecting and storing CDR and other data from PortStore units. The program is available free of charge for collecting data from up to three devices, commercial version supports up to 64 data sources (IP addresses).

Security & Home automation

  • HWg-DCD2

    Windows application for controlling access to cabinets in a data center. Remote opening of cabinet doors using RFID, SMS, or operator command, not limited to data centers

Mobile applications

  • SensDesk Mobile

    SensDesk Mobile is Android application used to display all your sensors on the screen of mobile device. Connect your IP sensors from HW group to the online portal


  • 1Wire HWg-Uni Calibrator

    1-Wire UNI sensors enables setting and calibration of the measured values, including an option to change the unit type of the value, an exponent and, based on the sensor's type, up to 8-point calibration chart.

  • Hercules SETUP utility

    Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal), UDP/IP terminal and TCP/IP Client Server terminal

  • HWg Calibrator

    The HW calibrator is used to set the shift calibration for sensors in devices connected via Poseidon units.

  • HWg Upgrader

    Application HWg-Upgrader allows mass firmware update/upgrade and configuration of HWg devices via Ethernet.

  • PosDamIO

    Windows/Linux command-line utility for controlling Poseidon & Damocles. Activate a Poseidon output quickly and easily using an icon on your desktop that calls PosDamIO.

  • SAL232 - Loger & Analyzer

    SAL232 is simple free utility from HW server, which logs data from the RS-232 serial port. Received data are stored together with time marks that can be used to read time context. Recorded data can be stored in .RTF file.